philip,
(02)97553972
42 riverside road,
chipping norton
matt.
-----Original Message-----
From: Philip Shields <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Friday, 1 June 2001 2:15
Subject: Re: FJ20DET Manifolds
>Matt do you have a phone number and address for this place.
>philip j shields
>
>
>>From: "Matt" <[EMAIL PROTECTED]>
>>Reply-To: [EMAIL PROTECTED]
>>To: <[EMAIL PROTECTED]>
>>Subject: Re: FJ20DET Manifolds
>>Date: Wed, 30 May 2001 14:46:25 +1000
>>
>>philip,
>>there in nsw.
>>
>>matt
>>-----Original Message-----
>>From: Philip Shields <[EMAIL PROTECTED]>
>>To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>>Date: Tuesday, 29 May 2001 12:15
>>Subject: Re: FJ20DET Manifolds
>>
>>
>> >what state
>> >philip j shields
>> >
>> >
>> >>From: "Matt" <[EMAIL PROTECTED]>
>> >>Reply-To: [EMAIL PROTECTED]
>> >>To: <[EMAIL PROTECTED]>
>> >>Subject: Re: FJ20DET Manifolds
>> >>Date: Thu, 24 May 2001 12:01:03 +1000
>> >>
>> >>james,
>> >>i found an importer in chipping norton that sells fj20t with g/box
>> >>,loom,ecu
>> >>for $1200 also has sr20t,g/box,loom,ecu for $1900
>> >>cheers
>> >>matt
>> >>-----Original Message-----
>> >>From: jamesf <[EMAIL PROTECTED]>
>> >>To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>> >>Date: Thursday, 24 May 2001 2:11
>> >>Subject: Re: FJ20DET Manifolds
>> >>
>> >>
>> >> >I went out this arvo to have look at a couple of FJ20det's we
>> >> >tracked down in Melbourne.. both are the 'over the radiator
>> >> >hose' type, like 'Jake's'... looks like that's what we are
getting....
>> >> >
>> >> >After a trip to a state round of the sports sedans at sandown
>> >> >recently, we have done an about face on the engine side of
>> >> >things with our race cars... now going with the FJ's...
>> >> >
>> >> >So if anybody wants a Z18et complete.. we have a couple
>> >> >for sale (with engine mounts to fit into a sunny too if you
>> >> >want them :)
>> >> >
>> >> >cya
>> >> >James
>> >> >
>> >> >
>> >> >Terry Rudd wrote:
>> >> >
>> >> >> Gooday Matt,
>> >> >>
>> >> >> You are absolutely correct and I made a big blooper last night with
>> >>these
>> >> >> manifolds. There are two Skyline FJ's and only one S12 version.
>> >> >>
>> >> >> regards
>> >> >> Terry
>> >> >>
>> >> >> -----Original Message-----
>> >> >> From: [EMAIL PROTECTED]
>> >> >> [mailto:[EMAIL PROTECTED]]On Behalf Of Matt
>> >> >> Sent: Tuesday, 22 May 2001 4:46
>> >> >> To: [EMAIL PROTECTED]
>> >> >> Subject: Re: FJ20DET Manifolds
>> >> >>
>> >> >> james,
>> >> >> there all skyline manifolds , the first one from autospeed has been
>> >>'cleaned
>> >> >> up' looks like he's remove alot of polution stuff on there. i have
a
>> >>pic
>> >>of
>> >> >> the gazelle manifold if you want to see what they look like.
>> >> >> cheers
>> >> >> matt
>> >> >> -----Original Message-----
>> >> >> From: jamesf <[EMAIL PROTECTED]>
>> >> >> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>> >> >> Date: Monday, 21 May 2001 9:12
>> >> >> Subject: Re: FJ20DET Manifolds
>> >> >>
>> >> >> >Ok.. I thought there was only the 2 types to choose from... but
>> >> >> >I have found 3 different ones so far.... all factory.. how many
>> >> >> >others are there?
>> >> >> >
>> >> >> >http://www.autospeed.com/A_0455/P_1/article.html
>> >> >> >
>> >> >> >http://www.ozdat.com/ozdatonline/featurecars/jakeFJ/jakefj6.html
>> >> >> >
>> >> >>
>http://www.ozdat.com/ozdatonline/featurecars/HenriFJ/henri_dat3.htm
>> >> >> >
>> >> >> >Anybody know what each type is from?
>> >> >> >
>> >> >> >regards
>> >> >> >James
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> >Terry Rudd wrote:
>> >> >> >
>> >> >> >> James,
>> >> >> >>
>> >> >> >> Only the DR30 engine was available only with factory i/c
although
>> >>I've
>> >> >> seen
>> >> >> >> up to 9 psi run on these engines without an i/c fitted. The DR30
>>i/c
>> >>is a
>> >> >> >> lunchbox but even so it's surprising effective up to around 9-10
>> >>psi.
>> >>I
>> >> >> >> chose that engine as it had a much better potential for coping
>>with
>> >> >> moderate
>> >> >> >> boost (up to 1 bar) when fitted with a Cordia or Supra i/c. It
>>has
>>a
>> >> >> better
>> >> >> >> turbo stock, problem is the stock exhaust manifold is further
>> >>rearward
>> >> >> and
>> >> >> >> is a bit of a pain to fit on a 1600. The lower C/R engine is out
>>of
>> >>the
>> >> >> S12
>> >> >> >> but the bigger exhaust housing is off the DR30. I've seen the
>>other
>> >>way
>> >> >> >> round done on a 1600 quite a few times as it's an easier fit on
a
>> >>manual
>> >> >> >> body. The factory inlet manifold is basically the same on either
>> >>turbo
>> >> >> >> engine afaik, there are a couple of varieties on the NA engines
>> >>though.
>> >> >> >>
>> >> >> >> regards
>> >> >> >> Terry
>> >> >> >>
>> >> >> >> -----Original Message-----
>> >> >> >> From: [EMAIL PROTECTED]
>> >> >> >> [mailto:[EMAIL PROTECTED]]On Behalf Of jamesf
>> >> >> >> Sent: Monday, 21 May 2001 7:16
>> >> >> >> To: [EMAIL PROTECTED]
>> >> >> >> Subject: Re: FJ20DET Manifolds
>> >> >> >>
>> >> >> >> That's the question... Skyline or Gazelle.... though Custom
>> >> >> >> inlet might be an option down the track a bit...
>> >> >> >> But right now I want to get the best base engine... and
>> >> >> >> I have found I can get either one... So which is the best?
>> >> >> >>
>> >> >> >> Also were both of those available in Intercooled or non
>> >> >> >> intercooled versions from the Factory? or was it just the
>> >> >> >> gazelle one??
>> >> >> >> ... Cause I want the non intercooled version for the
>> >> >> >> 7:5 to 1 comp ratio and the bigger Exhaust housing on the
>> >> >> >> turbo...
>> >> >> >>
>> >> >> >> Any ideas?
>> >> >> >>
>> >> >> >> Regards
>> >> >> >> James
>> >> >> >>
>> >> >> >> Zac Campbell wrote:
>> >> >> >>
>> >> >> >> > I think James is referring to the Skyline vs Gazelle
manifolds?
>> >> >> >> >
>> >> >> >> > zac
>> >> >> >> >
>> >> >> >> > ----- Original Message -----
>> >> >> >> > From: andrew smith <[EMAIL PROTECTED]>
>> >> >> >> > To: <[EMAIL PROTECTED]>
>> >> >> >> > Sent: Monday, May 21, 2001 3:46 PM
>> >> >> >> > Subject: Re: FJ20DET Manifolds
>> >> >> >> >
>> >> >> >> > > James,
>> >> >> >> > > Shorter inlet runners produce horsepower higher on the rev
>> >>scale.Paul
>> >> >> >> > > Staneks fj20 1200 coupe has a manufacuted manifold that uses
>> >>very
>> >> >> short
>> >> >> >> > > runners with a large plennum.
>> >> >> >> > > Andrew Smith
>> >> >> >> > >
>> >> >> >> > > jamesf wrote:
>> >> >> >> > >
>> >> >> >> > > > Hi List
>> >> >> >> > > > Just wondering which of the FJ20DET inlet manifolds
>> >> >> >> > > > is the better...the long or the short?
>> >> >> >> > > > which has the highest HP potential??
>> >> >> >> > > > regards
>> >> >> >> > > > James
>> >> >> >> > > > --
>> >> >> >> > > >
>> >> >> >>
>>
>>________________________________________________________________________
>> >> >> >> > > >
>> >> >> >> > > > James Fitness
>> >> >> >> > > > Director
>> >> >> >> > > > Data Scribe Australia Pty Ltd
>> >> >> >> > > > http://www.datascribe.com.au
>> >> >> >> > > > Computers and Supplies
>> >> >> >> > > >
>> >> >> >> > > > OZDAT Online
>> >> >> >> > > > http://www.ozdat.com/ozdatonline/index.htm
>> >> >> >> > > >
>> >> >> >> > >
>> >> >> >>
>> >> >> >> --
>> >> >> >>
>>
>>________________________________________________________________________
>> >> >> >>
>> >> >> >> James Fitness
>> >> >> >> Director
>> >> >> >> Data Scribe Australia Pty Ltd
>> >> >> >> http://www.datascribe.com.au
>> >> >> >> Computers and Supplies
>> >> >> >>
>> >> >> >> OZDAT Online
>> >> >> >> http://www.ozdat.com/ozdatonline/index.htm
>> >> >> >>
>> >> >> >
>> >> >> >--
>> >> >>
>> >>
>> >________________________________________________________________________
>> >> >> >
>> >> >> >James Fitness
>> >> >> >Director
>> >> >> >Data Scribe Australia Pty Ltd
>> >> >> >http://www.datascribe.com.au
>> >> >> >Computers and Supplies
>> >> >> >
>> >> >> >OZDAT Online
>> >> >> >http://www.ozdat.com/ozdatonline/index.htm
>> >> >> >
>> >> >> >
>> >> >
>> >> >--
>> >>
>> >________________________________________________________________________
>> >> >
>> >> >James Fitness
>> >> >Director
>> >> >Data Scribe Australia Pty Ltd
>> >> >http://www.datascribe.com.au
>> >> >Computers and Supplies
>> >> >
>> >> >OZDAT Online
>> >> >http://www.ozdat.com/ozdatonline/index.htm
>> >> >
>> >> >
>> >
>>
>_________________________________________________________________________
>> >Get Your Private, Free E-mail from MSN Hotmail at
http://www.hotmail.com.
>
>_________________________________________________________________________
>Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
