well I'm getting a bit of conflict here so can I fit 240K twin spot calipers on 200B struts using 253mm disks with my 13" Cheviot mags ?
What are the 253mm disks off ? cheers Chris > contrary to popular belief, the 300ZX/S14 280mm discs and 4-spots fit > under a 14" wheel. as mentioned by the others, it depends on the > wheel, this was with a 14" x 7" Superlite > > ----- Original Message ----- > From: Richardson, Thomas Morgwn - RICTM002 > To: '[EMAIL PROTECTED]' > Sent: Sunday, November 25, 2001 8:23 AM > Subject: RE: 240k twin spot calipers + flywheel > > > The 253mm discs and calipers will fit, the 270mm discs and calipers > wont. They come with 14" steel rims as stock, but alloy rims > generally have a lot more clearance, but obviously varies between > manufacturers which is why I said I had Cheviot rims. > -----Original Message----- > From: maldat [mailto:[EMAIL PROTECTED]] > Sent: Sunday, 25 November 2001 10:25 AM > To: [EMAIL PROTECTED] > Subject: Re: 240k twin spot calipers + flywheel > > > 240K AKA C110 skyline dont take 13"" wheels as they do not clear > the front cailpair, This is why they have 14" wheels as stock > 240K's have two types of cailpiar both dont take 13" > Malcolm > "Richardson, Thomas Morgwn - RICTM002" wrote: > > > I'm using 13" Cheviot mags with 240k struts (253mm disc, Sumitomo > twin spots) > > Yes > > Possibly redrilled S13 Silvia CA18DE 250mm vented or redrilled > SR20DE 280mm vented, but nobody has tried it, yet! > > Yes, the six cylinder flywheels can take a 225mm clutch and are a > bit lighter than an 4cyl one > > No > > - Tom > > -----Original Message----- > From: Chris Williams [mailto:[EMAIL PROTECTED]] > Sent: Saturday, 24 November 2001 11:33 PM > To: [EMAIL PROTECTED] > Subject: 240k twin spot calipers + flywheel > > hi listers, > a couple of questions if I may? > > Do I need larger than 13" wheels to fit 240K twin spots under? If > yes how big 14" or 15"? > > Will they fit on 200B struts? > > What vented rotors are good that will fit 200B struts assuming a > yes to previous Q or can I use 200B rotors or what vented rotors > for a 240K strut? > > Is a 240K flywheel a good idea for a mildly worked L20B? > Reasoning being lighter and able to take bigger clutch. > > Plus do you get probs with steering gear not fitting on the > bottom of the 200B strut with the larger calipers? > > thanks > > Chris. > > > > > --membersozdat------------------------------------------------------ - > OZDAT Mailing List Please Note:- > Send (un)subscribe requests to [EMAIL PROTECTED] > Send submissions to [EMAIL PROTECTED] > No unauthorised redistribution of this email > http://www.ozdat.com/ozdatonline/index.htm > http://www.ozdat.com/ozdatonline/listindex.html > http://www.mail-archive.com/[email protected]/ > --------------------------------------------------------------------- > > > --membersozdat------------------------------------------------------ - > OZDAT Mailing List Please Note:- > Send (un)subscribe requests to [EMAIL PROTECTED] Send > submissions to [EMAIL PROTECTED] > No unauthorised redistribution of this email > http://www.ozdat.com/ozdatonline/index.htm > http://www.ozdat.com/ozdatonline/listindex.html > http://www.mail-archive.com/[email protected]/ > --------------------------------------------------------------------- > > > --membersozdat------------------------------------------------------- > OZDAT Mailing List Please Note:- > Send (un)subscribe requests to [EMAIL PROTECTED] > Send submissions to [EMAIL PROTECTED] > No unauthorised redistribution of this email > http://www.ozdat.com/ozdatonline/index.htm > http://www.ozdat.com/ozdatonline/listindex.html > http://www.mail-archive.com/[email protected]/ > --------------------------------------------------------------------- > > --membersozdat------------------------------------------------------- > OZDAT Mailing List Please Note:- > Send (un)subscribe requests to [EMAIL PROTECTED] > Send submissions to [EMAIL PROTECTED] > No unauthorised redistribution of this email > http://www.ozdat.com/ozdatonline/index.htm > http://www.ozdat.com/ozdatonline/listindex.html > http://www.mail-archive.com/[email protected]/ > --------------------------------------------------------------------- > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
