on the DBA site it mentions the 253 mm disc is on the 240K 4door the 270mm were on the 2 door ... if my memory serves me correct.
the 4 spots i would assume are the S14/Z32/R32 calipers, which coincidentally are the same as WRX STI and also as i found out on friday whilst trying to source some pads for someone for a 3000GT/GTO, could very well be the same. ----- Original Message ----- From: "maldat" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, November 26, 2001 4:11 PM Subject: Re: 240k twin spot calipers + flywheel > 13x6 minilites Dont fit on a 510 with 240K legs,and they dont fit a factory C110 > coupe. > They would fit if a wee bit was ground off I sopose,on the cailpair.. > But why run 13" anyway? > Malcolm > > [EMAIL PROTECTED] wrote: > > > Try it and see! > > > > > well I'm getting a bit of conflict here so can I fit 240K twin spot calipers > > on > > > 200B struts using 253mm disks with my 13" Cheviot mags ? > > > > > > What are the 253mm disks off ? > > > > > > cheers Chris > > > > > > > contrary to popular belief, the 300ZX/S14 280mm discs and 4-spots fit > > > > under a 14" wheel. as mentioned by the others, it depends on the > > > > wheel, this was with a 14" x 7" Superlite > > > > > > > > ----- Original Message ----- > > > > From: Richardson, Thomas Morgwn - RICTM002 > > > > To: '[EMAIL PROTECTED]' > > > > Sent: Sunday, November 25, 2001 8:23 AM > > > > Subject: RE: 240k twin spot calipers + flywheel > > > > > > > > > > > > The 253mm discs and calipers will fit, the 270mm discs and calipers > > > > wont. They come with 14" steel rims as stock, but alloy rims > > > > generally have a lot more clearance, but obviously varies between > > > > manufacturers which is why I said I had Cheviot rims. > > > > -----Original Message----- > > > > From: maldat [mailto:[EMAIL PROTECTED]] > > > > Sent: Sunday, 25 November 2001 10:25 AM > > > > To: [EMAIL PROTECTED] > > > > Subject: Re: 240k twin spot calipers + flywheel > > > > > > > > > > > > 240K AKA C110 skyline dont take 13"" wheels as they do not clear > > > > the front cailpair, This is why they have 14" wheels as stock > > > > 240K's have two types of cailpiar both dont take 13" > > > > Malcolm > > > > "Richardson, Thomas Morgwn - RICTM002" wrote: > > > > > > > > > > > > I'm using 13" Cheviot mags with 240k struts (253mm disc, Sumitomo > > > > twin spots) > > > > > > > > Yes > > > > > > > > Possibly redrilled S13 Silvia CA18DE 250mm vented or redrilled > > > > SR20DE 280mm vented, but nobody has tried it, yet! > > > > > > > > Yes, the six cylinder flywheels can take a 225mm clutch and are a > > > > bit lighter than an 4cyl one > > > > > > > > No > > > > > > > > - Tom > > > > > > > > -----Original Message----- > > > > From: Chris Williams [mailto:[EMAIL PROTECTED]] > > > > Sent: Saturday, 24 November 2001 11:33 PM > > > > To: [EMAIL PROTECTED] > > > > Subject: 240k twin spot calipers + flywheel > > > > > > > > hi listers, > > > > a couple of questions if I may? > > > > > > > > Do I need larger than 13" wheels to fit 240K twin spots under? If > > > > yes how big 14" or 15"? > > > > > > > > Will they fit on 200B struts? > > > > > > > > What vented rotors are good that will fit 200B struts assuming a > > > > yes to previous Q or can I use 200B rotors or what vented rotors > > > > for a 240K strut? > > > > > > > > Is a 240K flywheel a good idea for a mildly worked L20B? > > > > Reasoning being lighter and able to take bigger clutch. > > > > > > > > Plus do you get probs with steering gear not fitting on the > > > > bottom of the 200B strut with the larger calipers? > > > > > > > > thanks > > > > > > > > Chris. > > > > > > > > > > > > > > > > > > > --membersozdat------------------------------------------------------ > > > - > > > > OZDAT Mailing List Please Note:- > > > > Send (un)subscribe requests to [EMAIL PROTECTED] > > > > Send submissions to [EMAIL PROTECTED] > > > > No unauthorised redistribution of this email > > > > http://www.ozdat.com/ozdatonline/index.htm > > > > http://www.ozdat.com/ozdatonline/listindex.html > > > > http://www.mail-archive.com/[email protected]/ > > > --------------------------------------------------------------------- > > > > > > > > > > > --membersozdat------------------------------------------------------ > > > - > > > > OZDAT Mailing List Please Note:- > > > > Send (un)subscribe requests to [EMAIL PROTECTED] Send > > > > submissions to [EMAIL PROTECTED] > > > > No unauthorised redistribution of this email > > > > http://www.ozdat.com/ozdatonline/index.htm > > > > http://www.ozdat.com/ozdatonline/listindex.html > > > > http://www.mail-archive.com/[email protected]/ > > > --------------------------------------------------------------------- > > > > > > > > > > > --membersozdat------------------------------------------------------- > > > > OZDAT Mailing List Please Note:- > > > > Send (un)subscribe requests to [EMAIL PROTECTED] > > > > Send submissions to [EMAIL PROTECTED] > > > > No unauthorised redistribution of this email > > > > http://www.ozdat.com/ozdatonline/index.htm > > > > http://www.ozdat.com/ozdatonline/listindex.html > > > > http://www.mail-archive.com/[email protected]/ > > > --------------------------------------------------------------------- > > > > > > > --membersozdat------------------------------------------------------- > > > > OZDAT Mailing List Please Note:- > > > > Send (un)subscribe requests to [EMAIL PROTECTED] > > > > Send submissions to [EMAIL PROTECTED] > > > > No unauthorised redistribution of this email > > > > http://www.ozdat.com/ozdatonline/index.htm > > > > http://www.ozdat.com/ozdatonline/listindex.html > > > > http://www.mail-archive.com/[email protected]/ > > > --------------------------------------------------------------------- > > > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
