Try it and see!
> well I'm getting a bit of conflict here so can I fit 240K twin spot calipers
on
> 200B struts using 253mm disks with my 13" Cheviot mags ?
>
> What are the 253mm disks off ?
>
> cheers Chris
>
> > contrary to popular belief, the 300ZX/S14 280mm discs and 4-spots fit
> > under a 14" wheel. as mentioned by the others, it depends on the
> > wheel, this was with a 14" x 7" Superlite
> >
> > ----- Original Message -----
> > From: Richardson, Thomas Morgwn - RICTM002
> > To: '[EMAIL PROTECTED]'
> > Sent: Sunday, November 25, 2001 8:23 AM
> > Subject: RE: 240k twin spot calipers + flywheel
> >
> >
> > The 253mm discs and calipers will fit, the 270mm discs and calipers
> > wont. They come with 14" steel rims as stock, but alloy rims
> > generally have a lot more clearance, but obviously varies between
> > manufacturers which is why I said I had Cheviot rims.
> > -----Original Message-----
> > From: maldat [mailto:[EMAIL PROTECTED]]
> > Sent: Sunday, 25 November 2001 10:25 AM
> > To: [EMAIL PROTECTED]
> > Subject: Re: 240k twin spot calipers + flywheel
> >
> >
> > 240K AKA C110 skyline dont take 13"" wheels as they do not clear
> > the front cailpair, This is why they have 14" wheels as stock
> > 240K's have two types of cailpiar both dont take 13"
> > Malcolm
> > "Richardson, Thomas Morgwn - RICTM002" wrote:
> >
> >
> > I'm using 13" Cheviot mags with 240k struts (253mm disc, Sumitomo
> > twin spots)
> >
> > Yes
> >
> > Possibly redrilled S13 Silvia CA18DE 250mm vented or redrilled
> > SR20DE 280mm vented, but nobody has tried it, yet!
> >
> > Yes, the six cylinder flywheels can take a 225mm clutch and are a
> > bit lighter than an 4cyl one
> >
> > No
> >
> > - Tom
> >
> > -----Original Message-----
> > From: Chris Williams [mailto:[EMAIL PROTECTED]]
> > Sent: Saturday, 24 November 2001 11:33 PM
> > To: [EMAIL PROTECTED]
> > Subject: 240k twin spot calipers + flywheel
> >
> > hi listers,
> > a couple of questions if I may?
> >
> > Do I need larger than 13" wheels to fit 240K twin spots under? If
> > yes how big 14" or 15"?
> >
> > Will they fit on 200B struts?
> >
> > What vented rotors are good that will fit 200B struts assuming a
> > yes to previous Q or can I use 200B rotors or what vented rotors
> > for a 240K strut?
> >
> > Is a 240K flywheel a good idea for a mildly worked L20B?
> > Reasoning being lighter and able to take bigger clutch.
> >
> > Plus do you get probs with steering gear not fitting on the
> > bottom of the 200B strut with the larger calipers?
> >
> > thanks
> >
> > Chris.
> >
> >
> >
> >
> > --membersozdat------------------------------------------------------
> -
> > OZDAT Mailing List Please Note:-
> > Send (un)subscribe requests to [EMAIL PROTECTED]
> > Send submissions to [EMAIL PROTECTED]
> > No unauthorised redistribution of this email
> > http://www.ozdat.com/ozdatonline/index.htm
> > http://www.ozdat.com/ozdatonline/listindex.html
> > http://www.mail-archive.com/[email protected]/
> > ---------------------------------------------------------------------
> >
> >
> > --membersozdat------------------------------------------------------
> -
> > OZDAT Mailing List Please Note:-
> > Send (un)subscribe requests to [EMAIL PROTECTED] Send
> > submissions to [EMAIL PROTECTED]
> > No unauthorised redistribution of this email
> > http://www.ozdat.com/ozdatonline/index.htm
> > http://www.ozdat.com/ozdatonline/listindex.html
> > http://www.mail-archive.com/[email protected]/
> > ---------------------------------------------------------------------
> >
> >
> > --membersozdat-------------------------------------------------------
> > OZDAT Mailing List Please Note:-
> > Send (un)subscribe requests to [EMAIL PROTECTED]
> > Send submissions to [EMAIL PROTECTED]
> > No unauthorised redistribution of this email
> > http://www.ozdat.com/ozdatonline/index.htm
> > http://www.ozdat.com/ozdatonline/listindex.html
> > http://www.mail-archive.com/[email protected]/
> > ---------------------------------------------------------------------
> >
> > --membersozdat-------------------------------------------------------
> > OZDAT Mailing List Please Note:-
> > Send (un)subscribe requests to [EMAIL PROTECTED]
> > Send submissions to [EMAIL PROTECTED]
> > No unauthorised redistribution of this email
> > http://www.ozdat.com/ozdatonline/index.htm
> > http://www.ozdat.com/ozdatonline/listindex.html
> > http://www.mail-archive.com/[email protected]/
> > ---------------------------------------------------------------------
> >
>
>
>
