|
Yup
Z20E
31.6mm vs Z20S 35.5mm
hi, whats the difference between the z20e and
z20s pistons?i presume its the gudgeon pin position?
mark k
----- Original Message -----
Sent: Monday, December 03, 2001 5:49
PM
Subject: RE: Z series stuff again
Actually Mark, there are two different types of Z20 pistons, Z20E and
Z20S. Eddie will be able to use the L20b pistons if he uses L20b
conrods. He wouldn't be able to use the longer Z20S rods and L20b
pistons unless he REDUCED the Z20 crankshaft
stroke.
hi, they will work , but it depends
on what crank, rod etc, combonation u are
using.
in my l20 with z24 crank, i am
using 1 mm oversize Z20 pistons. the gudgeon pin to crown height is
closer than a l20b piston. i am using the z20 pistons due to
the extra stroke of the crank.
if u use the z20 and put in the l20 pistons ,
they will stick out the block. like i said depends on what conrod , crank
combo u end up using.
mark k
.----- Original Message -----
Sent: Monday, December 03, 2001
9:51 AM
Subject: Re: Z series stuff
again
Will pistons intended for an L20B work in a Z20S? I'm
converting a Z20S into an L series and have been offered some high comp
cosworth pistons but they are for an L20B. I was under the impression
that Z20S motors have longer rods...is that true?
Cheers,
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to
[EMAIL PROTECTED]
Send submissions to
[EMAIL PROTECTED]
No unauthorised redistribution of
this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to
[EMAIL PROTECTED]
Send submissions to
[EMAIL PROTECTED]
No unauthorised redistribution of this
email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to
[EMAIL PROTECTED]
Send submissions to
[EMAIL PROTECTED]
No unauthorised redistribution of this
email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to
[EMAIL PROTECTED]
Send submissions to
[EMAIL PROTECTED]
No unauthorised redistribution of this
email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
--------------------------------------------------------------------- |
