hi, no , theres a bearing or bush in the back of the crank to support the tip of the main gearbox shaft. usually if its a auto you are changing to a manual, you will need to put one of these in. i think its called a spigot bearing or bush,
if you have a look in any car repair book/manual under clutch/gearbox you will find out about it..... markk ----- Original Message ----- From: "Richardson, Thomas Morgwn - RICTM002" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, February 07, 2002 12:25 AM Subject: RE: Clutch/flywheel advice > You mean the thrust bearing? Yep, got a new one of those here waiting :) > > Cheers, > > - Tom > > -----Original Message----- > From: mark krawczuk [mailto:[EMAIL PROTECTED]] > Sent: Thursday, 7 February 2002 12:02 AM > To: [EMAIL PROTECTED] > Subject: Re: Clutch/flywheel advice > > > hi, i dont actually know about the bigger clutch, but just dont forget to > get/make sure there`s a bush in the back of the crank for the main gearbox > shaft. > > mark k > ----- Original Message ----- > From: "Richardson, Thomas Morgwn - RICTM002" > <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, February 06, 2002 11:37 PM > Subject: Clutch/flywheel advice > > > > List, > > > > I'm converting an L16 from an automatic to a manual and I have a brand new > > 225mm clutch kit from a L 6 that I want to use, to avoid buying a 200mm L > 4 > > kit. I can't take the flywheel with it because I don't happen to have a 6 > bolt > > Nismo L16 crankshaft handy. How hard/expensive or cheap/easy is it to > modify > > an L16 flywheel to accept the bigger plates? > > > > Cheers, > > > > - Tom > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
