Chris, I've explained speedo drives science and how to work it out to Stu a few times in the past - looks like I didn't do a good job. )-:
What he gave you is a stock ZL71B drive out of a FJ box. His advice is spot on with your tyres and a 3.54 diff! regards Terry -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Chris Howard Sent: Sunday, 10 February 2002 11:25 PM To: [EMAIL PROTECTED] Subject: RE: speedo's calibrating Good info Terry, Stewart Wilkins gave me a white 19 tooth drive which he said would be right for 195/50/15s but it reads too high... Anyone have a pink one spare? Cheers, Chris > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]] On Behalf Of Terry Rudd > Sent: Sunday, 10 February 2002 11:10 PM > To: [EMAIL PROTECTED] > Subject: RE: speedo's calibrating > > > Tobias, > > 195/50x15 do 918 rpm as they are slightly smaller than stock > 165SR13 (886 > rpm) so you need a 5x18 (black) for the steel type drive or > 6x22 (pink) > alloy type drive which are rare. The nearest for the alloy > drive you usually > find at the wreckers are from Stanza auto and these are 6x21 (purple). > > regards > Terry > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
