Datsport or Datspeed should be avoided at all costs. Barry Corner is likely to be the worst and most hopless repairer I have ever had the displeasure to deal with. Without going into any more detail, I have spoken to several ex customers all with horror stories to tell.
Regards, Jeremy Levartovsky 0413 756 555 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Tom Richardson Sent: Wednesday, 20 February 2002 7:14 PM To: [EMAIL PROTECTED] Subject: Re: Datsport and Wiring loom In my humble opinion, Datsport should be avoided. Paul Southern from the club bought an SR20DET fitting kit from Barry, and basically, it doesn't fit... If you don't want to give it a go yourself, try Maddat ($600, fully hidden) otherwise for a brilliant auto electrician visit Belair Road Auto Electrical. Cheers, - Tom Zac Campbell wrote: >Yeah I would shop around too. >one reason Barry has a lot of cars in his workshop is that it takes him a >long time to finish the work on each car. >I have heard that his wiring looms are good, but also very big and heavy. I >haven't seen one myself so can't comment. > >There is nothing wrong with your old datto wiring if it works. I actually >did pick up a good nick (for age) auto loom for <$50. > > >----- Original Message ----- >From: Justin Friedrichs <[EMAIL PROTECTED]> >To: <[EMAIL PROTECTED]> >Sent: Wednesday, February 20, 2002 10:17 AM >Subject: RE: Datsport and Wiring loom > > >>Yeah, >>The bloke is knowledgable, and has worked out a lot of cool bits for >> >dattos, > >>but I think it would be expensive to get him to do your wiring. He's got >>quite a few dattos in his workshop now, so he's pretty popular, but for >>wiring you should shop around for quotes. >> >>>-----Original Message----- >>>From: Swann, James [SMTP:[EMAIL PROTECTED]] >>>Sent: Wednesday, February 20, 2002 9:46 AM >>>To: '[EMAIL PROTECTED]' >>>Subject: Datsport and Wiring loom >>> >>>********************************************************************* * >>>IMPORTANT >>> >>> The information transmitted is for the use of the intended recipient >>> >only > >>> and may contain confidential and/or legally privileged material. Any >>> review, re-transmission, disclosure, dissemination or other use of, or >>> taking of any action in reliance upon, this information by persons or >>> entities other than the intended recipient is prohibited and may result >>>in >>> severe penalties. If you have received this e-mail in error please >>>notify >>> the Privacy Hotline of the Australian Taxation Office, telephone >>> 132869 and delete all copies of this transmission together >>> with any attachments. >>> >>>********************************************************************* * >>> >>>G'day Listers, >>> >>>I have been speaking to Barry from Datsport lately about a new wiring >>> >loom > >>>for my 1600. The old one is a huge mess and I want to clean it up but >>>wiring >>>isn't my forte, when I look at a wiring diagram it all looks Japanese to >>>me!!!!! >>> >>>I was wondering if anyone on the list had delt with Datsport lately and >>>what >>>they though of them (cos I have never delt with them myself but they >>> >seem > >>>good over the phone), and also if anyone had purchased one of their >>> >wiring > >>>looms, what they were like quality wise. >>> >>>Feel free to reply privately to me if you don't want you opinion to be >>>public. >>> >>>Anyone know of anyone else who does looms for the 1600.....just want to >>>keep >>>my options open??? >>> >>>Thanx >>> >>>Swanny >>> >>> >> > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
