why not pull the wiring from another datsun and use it? i am almost sure that the 180b uses a loom which is almost spot on...when u remove it, mark it with tape and labels..this will cost u next to nothing to get, and u can learn to do the wiring yourself (if your that way inclined) i personally love learning new stuff and just rewired the dash on the 2 door....
food for thought tim >From: "James Empson" <[EMAIL PROTECTED]> >Reply-To: [EMAIL PROTECTED] >To: <[EMAIL PROTECTED]> >Subject: Re: Datsport and Wiring loom >Date: Wed, 20 Feb 2002 21:26:46 +1100 > >I can vouch for this also, I had the mis fortune of getting some work done >by datspeed (In Penrith) a few years ago. I ended up being screwed over and >being left out of pocket some $1500. > >James Empson. > >----- Original Message ----- >From: "Jeremy Levartovsky" <[EMAIL PROTECTED]> >To: <[EMAIL PROTECTED]> >Sent: Wednesday, 20 February 2002 8:25 >Subject: RE: Datsport and Wiring loom > > > > Datsport or Datspeed should be avoided at all costs. Barry Corner is > > likely to be the worst and most hopless repairer I have ever had the > > displeasure to deal with. Without going into any more detail, I have > > spoken to several ex customers all with horror stories to tell. > > > > Regards, > > > > Jeremy Levartovsky > > 0413 756 555 > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]] On Behalf Of Tom > > Richardson > > Sent: Wednesday, 20 February 2002 7:14 PM > > To: [EMAIL PROTECTED] > > Subject: Re: Datsport and Wiring loom > > > > In my humble opinion, Datsport should be avoided. Paul Southern from > > the club bought an SR20DET fitting kit from Barry, and basically, it > > doesn't fit... > > > > If you don't want to give it a go yourself, try Maddat ($600, fully > > hidden) otherwise for a brilliant auto electrician visit Belair Road > > Auto Electrical. > > > > Cheers, > > > > - Tom > > > > Zac Campbell wrote: > > > > >Yeah I would shop around too. > > >one reason Barry has a lot of cars in his workshop is that it takes him > > a > > >long time to finish the work on each car. > > >I have heard that his wiring looms are good, but also very big and > > heavy. I > > >haven't seen one myself so can't comment. > > > > > >There is nothing wrong with your old datto wiring if it works. I > > actually > > >did pick up a good nick (for age) auto loom for <$50. > > > > > > > > >----- Original Message ----- > > >From: Justin Friedrichs <[EMAIL PROTECTED]> > > >To: <[EMAIL PROTECTED]> > > >Sent: Wednesday, February 20, 2002 10:17 AM > > >Subject: RE: Datsport and Wiring loom > > > > > > > > >>Yeah, > > >>The bloke is knowledgable, and has worked out a lot of cool bits for > > >> > > >dattos, > > > > > >>but I think it would be expensive to get him to do your wiring. He's > > got > > >>quite a few dattos in his workshop now, so he's pretty popular, but > > for > > >>wiring you should shop around for quotes. > > >> > > >>>-----Original Message----- > > >>>From: Swann, James [SMTP:[EMAIL PROTECTED]] > > >>>Sent: Wednesday, February 20, 2002 9:46 AM > > >>>To: '[EMAIL PROTECTED]' > > >>>Subject: Datsport and Wiring loom > > >>> > > >>>********************************************************************* > > * > > >>>IMPORTANT > > >>> > > >>> The information transmitted is for the use of the intended recipient > > >>> > > >only > > > > > >>> and may contain confidential and/or legally privileged material. > > Any > > >>> review, re-transmission, disclosure, dissemination or other use of, > > or > > >>> taking of any action in reliance upon, this information by persons > > or > > >>> entities other than the intended recipient is prohibited and may > > result > > >>>in > > >>> severe penalties. If you have received this e-mail in error please > > >>>notify > > >>> the Privacy Hotline of the Australian Taxation Office, telephone > > >>> 132869 and delete all copies of this transmission together > > >>> with any attachments. > > >>> > > >>>********************************************************************* > > * > > >>> > > >>>G'day Listers, > > >>> > > >>>I have been speaking to Barry from Datsport lately about a new wiring > > >>> > > >loom > > > > > >>>for my 1600. The old one is a huge mess and I want to clean it up but > > >>>wiring > > >>>isn't my forte, when I look at a wiring diagram it all looks Japanese > > to > > >>>me!!!!! > > >>> > > >>>I was wondering if anyone on the list had delt with Datsport lately > > and > > >>>what > > >>>they though of them (cos I have never delt with them myself but they > > >>> > > >seem > > > > > >>>good over the phone), and also if anyone had purchased one of their > > >>> > > >wiring > > > > > >>>looms, what they were like quality wise. > > >>> > > >>>Feel free to reply privately to me if you don't want you opinion to > > be > > >>>public. > > >>> > > >>>Anyone know of anyone else who does looms for the 1600.....just want > > to > > >>>keep > > >>>my options open??? > > >>> > > >>>Thanx > > >>> > > >>>Swanny > > >>> > > >>> > > >> > > > > > > > > > > > > > > > _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp. --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
