I can vouch for this also, I had the mis fortune of getting some work done by datspeed (In Penrith) a few years ago. I ended up being screwed over and being left out of pocket some $1500.
James Empson. ----- Original Message ----- From: "Jeremy Levartovsky" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, 20 February 2002 8:25 Subject: RE: Datsport and Wiring loom > Datsport or Datspeed should be avoided at all costs. Barry Corner is > likely to be the worst and most hopless repairer I have ever had the > displeasure to deal with. Without going into any more detail, I have > spoken to several ex customers all with horror stories to tell. > > Regards, > > Jeremy Levartovsky > 0413 756 555 > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]] On Behalf Of Tom > Richardson > Sent: Wednesday, 20 February 2002 7:14 PM > To: [EMAIL PROTECTED] > Subject: Re: Datsport and Wiring loom > > In my humble opinion, Datsport should be avoided. Paul Southern from > the club bought an SR20DET fitting kit from Barry, and basically, it > doesn't fit... > > If you don't want to give it a go yourself, try Maddat ($600, fully > hidden) otherwise for a brilliant auto electrician visit Belair Road > Auto Electrical. > > Cheers, > > - Tom > > Zac Campbell wrote: > > >Yeah I would shop around too. > >one reason Barry has a lot of cars in his workshop is that it takes him > a > >long time to finish the work on each car. > >I have heard that his wiring looms are good, but also very big and > heavy. I > >haven't seen one myself so can't comment. > > > >There is nothing wrong with your old datto wiring if it works. I > actually > >did pick up a good nick (for age) auto loom for <$50. > > > > > >----- Original Message ----- > >From: Justin Friedrichs <[EMAIL PROTECTED]> > >To: <[EMAIL PROTECTED]> > >Sent: Wednesday, February 20, 2002 10:17 AM > >Subject: RE: Datsport and Wiring loom > > > > > >>Yeah, > >>The bloke is knowledgable, and has worked out a lot of cool bits for > >> > >dattos, > > > >>but I think it would be expensive to get him to do your wiring. He's > got > >>quite a few dattos in his workshop now, so he's pretty popular, but > for > >>wiring you should shop around for quotes. > >> > >>>-----Original Message----- > >>>From: Swann, James [SMTP:[EMAIL PROTECTED]] > >>>Sent: Wednesday, February 20, 2002 9:46 AM > >>>To: '[EMAIL PROTECTED]' > >>>Subject: Datsport and Wiring loom > >>> > >>>********************************************************************* > * > >>>IMPORTANT > >>> > >>> The information transmitted is for the use of the intended recipient > >>> > >only > > > >>> and may contain confidential and/or legally privileged material. > Any > >>> review, re-transmission, disclosure, dissemination or other use of, > or > >>> taking of any action in reliance upon, this information by persons > or > >>> entities other than the intended recipient is prohibited and may > result > >>>in > >>> severe penalties. If you have received this e-mail in error please > >>>notify > >>> the Privacy Hotline of the Australian Taxation Office, telephone > >>> 132869 and delete all copies of this transmission together > >>> with any attachments. > >>> > >>>********************************************************************* > * > >>> > >>>G'day Listers, > >>> > >>>I have been speaking to Barry from Datsport lately about a new wiring > >>> > >loom > > > >>>for my 1600. The old one is a huge mess and I want to clean it up but > >>>wiring > >>>isn't my forte, when I look at a wiring diagram it all looks Japanese > to > >>>me!!!!! > >>> > >>>I was wondering if anyone on the list had delt with Datsport lately > and > >>>what > >>>they though of them (cos I have never delt with them myself but they > >>> > >seem > > > >>>good over the phone), and also if anyone had purchased one of their > >>> > >wiring > > > >>>looms, what they were like quality wise. > >>> > >>>Feel free to reply privately to me if you don't want you opinion to > be > >>>public. > >>> > >>>Anyone know of anyone else who does looms for the 1600.....just want > to > >>>keep > >>>my options open??? > >>> > >>>Thanx > >>> > >>>Swanny > >>> > >>> > >> > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
