Turn the idle scew in one turn then back out one turn and see if the butterfly moves while your doing this.
Lachlan Hughes wrote: > how do i check if the butterfly shafts have returned to the idle screws?? > thanks > > >From: andrew smith <[EMAIL PROTECTED]> > >Reply-To: [EMAIL PROTECTED] > >To: [EMAIL PROTECTED] > >Subject: Re: Help needed - Idle speed on L20B > >Date: Mon, 25 Feb 2002 12:07:06 +0800 > > > >If you have held your finger over the fitting you put in the manifold for > >the > >brake booster and the idle didnt change then that rules that out.I usually > >rule > >out leaks by spraying aerostart around around areas that might leak.Have > >you > >made sure that the butterflies shafts are returning to the idle screws. > >Andrew Smith > > > >Lachlan Hughes wrote: > > > > > Could it be something to do with my brake booster? I removed the > >carbies to > > > drill a hole in the manifold for the vacuum hose to connect to the > >booster. > > > Could this be anything to do with the problem, ie if the booster is not > > > working properly would it make it rev higher. Although, I did remove > >the > > > vacuum hose on the weekend and blocked the hole with my finger and this > > > didn't do anything. > > > > > > >From: andrew smith <[EMAIL PROTECTED]> > > > >Reply-To: [EMAIL PROTECTED] > > > >To: [EMAIL PROTECTED] > > > >Subject: Re: Help needed - Idle speed on L20B > > > >Date: Mon, 25 Feb 2002 10:28:50 +0800 > > > > > > > >Sounds like it could be sucking air somewhere.Maybe at the manifold or > > > >carby > > > >gasket or a tube could be off. > > > >Andrew Smith > > > > > > > >Lachlan Hughes wrote: > > > > > > > > > List, > > > > > I am trying to work out how I lower the idle speed on my L20B. It > >has > > > >twin > > > > > 40mm dellortos, which have chokes. After I removed the carbies one > >day > > > >and > > > > > re-installed them again, without adjusting or touching anything, my > >1600 > > > >has > > > > > been revving at about 2500rpm for its idle speed. Any help on how I > > > >lower > > > > > it would be appreciated. I have tried fiddling with some screws on > >the > > > > > carbies but they don't seem to do anything. > > > > > Thanks > > > > > Lochie > > > > > > > > > > _________________________________________________________________ > > > > > Join the world�s largest e-mail service with MSN Hotmail. > > > > > http://www.hotmail.com > > > > > > > > > > > > > > > _________________________________________________________________ > > > Chat with friends online, try MSN Messenger: http://messenger.msn.com > > > > > > > _________________________________________________________________ > Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp. > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
