Could it be something to do with my brake booster? I removed the carbies to drill a hole in the manifold for the vacuum hose to connect to the booster. Could this be anything to do with the problem, ie if the booster is not working properly would it make it rev higher. Although, I did remove the vacuum hose on the weekend and blocked the hole with my finger and this didn't do anything.
>From: andrew smith <[EMAIL PROTECTED]> >Reply-To: [EMAIL PROTECTED] >To: [EMAIL PROTECTED] >Subject: Re: Help needed - Idle speed on L20B >Date: Mon, 25 Feb 2002 10:28:50 +0800 > >Sounds like it could be sucking air somewhere.Maybe at the manifold or >carby >gasket or a tube could be off. >Andrew Smith > >Lachlan Hughes wrote: > > > List, > > I am trying to work out how I lower the idle speed on my L20B. It has >twin > > 40mm dellortos, which have chokes. After I removed the carbies one day >and > > re-installed them again, without adjusting or touching anything, my 1600 >has > > been revving at about 2500rpm for its idle speed. Any help on how I >lower > > it would be appreciated. I have tried fiddling with some screws on the > > carbies but they don't seem to do anything. > > Thanks > > Lochie > > > > _________________________________________________________________ > > Join the world�s largest e-mail service with MSN Hotmail. > > http://www.hotmail.com > > > _________________________________________________________________ Chat with friends online, try MSN Messenger: http://messenger.msn.com --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
