Have you got a good return spring on there? Sometimes with out a tight spring they will stay open a little and if your is a nicely worked motor with quite a large amount of static idle then a small change in the throttle will make it rev quite highly at idle.
just a thought thou chris s Ben writes: > the cable might be keeping the carbs open a bit, you looked at that?? > > > ----- Original Message ----- > From: "Lachlan Hughes" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Sunday, February 24, 2002 5:37 PM > Subject: Help needed - Idle speed on L20B > > > > List, > > I am trying to work out how I lower the idle speed on my L20B. It has > twin > > 40mm dellortos, which have chokes. After I removed the carbies one day > and > > re-installed them again, without adjusting or touching anything, my 1600 > has > > been revving at about 2500rpm for its idle speed. Any help on how I lower > > it would be appreciated. I have tried fiddling with some screws on the > > carbies but they don't seem to do anything. > > Thanks > > Lochie > > > > _________________________________________________________________ > > Join the world's largest e-mail service with MSN Hotmail. > > http://www.hotmail.com > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
