Johnty, Skyline/Pintara R31 are the most popular rear disc conversion for a 1600. The bits are cheap and almost everywhere and they are as easy as it gets to fit and plumb in. The hand brake cable is the tricky bit, but these are available in the correct lengths already made up new in Sydney at around $140 the pair which is good value.
A Bluebird TRX rear disc and R30 aren't too bad to adapt to the 1600 but they both are a level up on the R31 as they require a new mounting bracket whereas the R31 bracket can be modified to fit. regards Terry -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Blown 510 Sent: Sunday, 10 March 2002 8:32 PM To: Ozdat Subject: Disk brake rear ends I need help on a disk brake rear end for my datsun 1600. What do the blue bird rear ends bolt straight in to the 1600. I have a modified rear end already in my 1600 with a 240 k diff and axels the cross member is also modified to fit a 3 inch exhaust threw it as well. I really like the rear end set up at the moment is there any way I might be able to link in the the blue bird rear disks to my current set up. Any help would be great. johnty --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
