Well when I put my L20B in my 1600 a month or two ago I did not need to lower the engine it just bolted straight in. But you do need to use the 1600 sump and oil pick up. My 5c worth
Chris WIlliams > David, > The Ozdat archives are accessed by the hyperlink at the very bottom of > this e-mail. I meant the lower control arms that are already in the > car. To fit an L20 the bonnet will hit the top of the rocker cover so > you have to get the engine to sit lower in the engine bay. > Cheers > Feral Errol > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of David Dahl > Sent: Saturday, 23 March 2002 9:17 PM > To: [EMAIL PROTECTED] > Subject: Re: out goes L16, in goes L20B > > But I dont have a L16, i will buy a l20 with g/box will that work and > what u mean by archives, what u mean by my own arms, and what do you > mean by slotting my e/mounts > sorry dude, but im pretty doff hey > ----- Original Message ----- > From: "E Smith" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Saturday, March 23, 2002 10:36 AM > Subject: RE: out goes L16, in goes L20B > > >> Use the same one you had behind the L16. and the same tailshaft. For >> the rest go through the archives >> >> Cheers >> Feral Errol >> >> -----Original Message----- >> From: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED]]On Behalf Of David Dahl >> Sent: Saturday, 23 March 2002 1:07 PM >> To: [EMAIL PROTECTED] >> Subject: Re: out goes L16, in goes L20B >> >> What g/box do i need to use if i use the stanza axles, and does my >> shaft > fit >> onto stanza, with my g/box. Will my axle shaft g/box fit ok straight >> onto the l20b, >> >> what cam could i put in it and what else can i do, i currently have a > rs2000 >> carby on my 1200 which i could put on it, have got extractors and 2" > exhaust >> on 1200, but will need to get new extractors for l20b and try keep my >> exhaust.so basically i need a cam to suit motor with rs2000 carby and >> extrators and 2" ex. will put 45 sides on later or sumfin >> >> Thanks feral Errol >> ----- Original Message ----- >> From: "E Smith" <[EMAIL PROTECTED]> >> To: <[EMAIL PROTECTED]> >> Sent: Thursday, March 21, 2002 3:52 AM >> Subject: RE: out goes L16, in goes L20B >> >> >> > Get a donor cross member from a stanza and leave the sunny arms etc. >> > It >> fits >> > straight in. You need to slot engine mounts to get the engine to sit > down >> so >> > it clears the bonnet though where an L16/18 fits a lot easier. >> > Stanza > H165 >> > rear axle fits as well. >> > >> > Cheers >> > Feral Errol >> > >> > -----Original Message----- >> > From: [EMAIL PROTECTED] >> > [mailto:[EMAIL PROTECTED]]On Behalf Of David Dahl >> > Sent: Wednesday, 20 March 2002 11:23 PM >> > To: [EMAIL PROTECTED] >> > Subject: Re: out goes L16, in goes L20B >> > >> > Do you know how much hassle it is putting a L20B into >> > a nissan sunny '81 model B310, is it just the x-member that needs to >> > be changed >> > >> > >> > >> >> >> > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
