But I dont have a L16, i will buy a l20 with g/box will that work and what u mean by archives, what u mean by my own arms, and what do you mean by slotting my e/mounts sorry dude, but im pretty doff hey ----- Original Message ----- From: "E Smith" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, March 23, 2002 10:36 AM Subject: RE: out goes L16, in goes L20B
> Use the same one you had behind the L16. and the same tailshaft. > For the rest go through the archives > > Cheers > Feral Errol > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of David Dahl > Sent: Saturday, 23 March 2002 1:07 PM > To: [EMAIL PROTECTED] > Subject: Re: out goes L16, in goes L20B > > What g/box do i need to use if i use the stanza axles, and does my shaft fit > onto stanza, with my g/box. Will my axle shaft g/box fit ok straight onto > the l20b, > > what cam could i put in it and what else can i do, i currently have a rs2000 > carby on my 1200 which i could put on it, have got extractors and 2" exhaust > on 1200, but will need to get new extractors for l20b and try keep my > exhaust.so basically i need a cam to suit motor with rs2000 carby and > extrators and 2" ex. will put 45 sides on later or sumfin > > Thanks feral Errol > ----- Original Message ----- > From: "E Smith" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Thursday, March 21, 2002 3:52 AM > Subject: RE: out goes L16, in goes L20B > > > > Get a donor cross member from a stanza and leave the sunny arms etc. It > fits > > straight in. You need to slot engine mounts to get the engine to sit down > so > > it clears the bonnet though where an L16/18 fits a lot easier. Stanza H165 > > rear axle fits as well. > > > > Cheers > > Feral Errol > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]]On Behalf Of David Dahl > > Sent: Wednesday, 20 March 2002 11:23 PM > > To: [EMAIL PROTECTED] > > Subject: Re: out goes L16, in goes L20B > > > > Do you know how much hassle it is putting a L20B into > > a nissan sunny '81 model B310, is it just the x-member that needs to be > > changed > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
