They are talking about an l20b into a B310 sunny.
----- Original Message ----- From: "Chris Williams" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, March 25, 2002 9:11 AM Subject: RE: out goes L16, in goes L20B > Well when I put my L20B in my 1600 a month or two ago I did not need to > lower the engine it just bolted straight in. But you do need to use the > 1600 sump and oil pick up. My 5c worth > > Chris WIlliams > > > David, > > The Ozdat archives are accessed by the hyperlink at the very bottom of > > this e-mail. I meant the lower control arms that are already in the > > car. To fit an L20 the bonnet will hit the top of the rocker cover so > > you have to get the engine to sit lower in the engine bay. > > Cheers > > Feral Errol > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]]On Behalf Of David Dahl > > Sent: Saturday, 23 March 2002 9:17 PM > > To: [EMAIL PROTECTED] > > Subject: Re: out goes L16, in goes L20B > > > > But I dont have a L16, i will buy a l20 with g/box will that work and > > what u mean by archives, what u mean by my own arms, and what do you > > mean by slotting my e/mounts > > sorry dude, but im pretty doff hey > > ----- Original Message ----- > > From: "E Smith" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Saturday, March 23, 2002 10:36 AM > > Subject: RE: out goes L16, in goes L20B > > > > > >> Use the same one you had behind the L16. and the same tailshaft. For > >> the rest go through the archives > >> > >> Cheers > >> Feral Errol > >> > >> -----Original Message----- > >> From: [EMAIL PROTECTED] > >> [mailto:[EMAIL PROTECTED]]On Behalf Of David Dahl > >> Sent: Saturday, 23 March 2002 1:07 PM > >> To: [EMAIL PROTECTED] > >> Subject: Re: out goes L16, in goes L20B > >> > >> What g/box do i need to use if i use the stanza axles, and does my > >> shaft > > fit > >> onto stanza, with my g/box. Will my axle shaft g/box fit ok straight > >> onto the l20b, > >> > >> what cam could i put in it and what else can i do, i currently have a > > rs2000 > >> carby on my 1200 which i could put on it, have got extractors and 2" > > exhaust > >> on 1200, but will need to get new extractors for l20b and try keep my > >> exhaust.so basically i need a cam to suit motor with rs2000 carby and > >> extrators and 2" ex. will put 45 sides on later or sumfin > >> > >> Thanks feral Errol > >> ----- Original Message ----- > >> From: "E Smith" <[EMAIL PROTECTED]> > >> To: <[EMAIL PROTECTED]> > >> Sent: Thursday, March 21, 2002 3:52 AM > >> Subject: RE: out goes L16, in goes L20B > >> > >> > >> > Get a donor cross member from a stanza and leave the sunny arms etc. > >> > It > >> fits > >> > straight in. You need to slot engine mounts to get the engine to sit > > down > >> so > >> > it clears the bonnet though where an L16/18 fits a lot easier. > >> > Stanza > > H165 > >> > rear axle fits as well. > >> > > >> > Cheers > >> > Feral Errol > >> > > >> > -----Original Message----- > >> > From: [EMAIL PROTECTED] > >> > [mailto:[EMAIL PROTECTED]]On Behalf Of David Dahl > >> > Sent: Wednesday, 20 March 2002 11:23 PM > >> > To: [EMAIL PROTECTED] > >> > Subject: Re: out goes L16, in goes L20B > >> > > >> > Do you know how much hassle it is putting a L20B into > >> > a nissan sunny '81 model B310, is it just the x-member that needs to > >> > be changed > >> > > >> > > >> > > >> > >> > >> > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
