David, The Ozdat archives are accessed by the hyperlink at the very bottom of this e-mail. I meant the lower control arms that are already in the car. To fit an L20 the bonnet will hit the top of the rocker cover so you have to get the engine to sit lower in the engine bay. Cheers Feral Errol
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of David Dahl Sent: Saturday, 23 March 2002 9:17 PM To: [EMAIL PROTECTED] Subject: Re: out goes L16, in goes L20B But I dont have a L16, i will buy a l20 with g/box will that work and what u mean by archives, what u mean by my own arms, and what do you mean by slotting my e/mounts sorry dude, but im pretty doff hey ----- Original Message ----- From: "E Smith" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, March 23, 2002 10:36 AM Subject: RE: out goes L16, in goes L20B > Use the same one you had behind the L16. and the same tailshaft. > For the rest go through the archives > > Cheers > Feral Errol > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of David Dahl > Sent: Saturday, 23 March 2002 1:07 PM > To: [EMAIL PROTECTED] > Subject: Re: out goes L16, in goes L20B > > What g/box do i need to use if i use the stanza axles, and does my shaft fit > onto stanza, with my g/box. Will my axle shaft g/box fit ok straight onto > the l20b, > > what cam could i put in it and what else can i do, i currently have a rs2000 > carby on my 1200 which i could put on it, have got extractors and 2" exhaust > on 1200, but will need to get new extractors for l20b and try keep my > exhaust.so basically i need a cam to suit motor with rs2000 carby and > extrators and 2" ex. will put 45 sides on later or sumfin > > Thanks feral Errol > ----- Original Message ----- > From: "E Smith" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Thursday, March 21, 2002 3:52 AM > Subject: RE: out goes L16, in goes L20B > > > > Get a donor cross member from a stanza and leave the sunny arms etc. It > fits > > straight in. You need to slot engine mounts to get the engine to sit down > so > > it clears the bonnet though where an L16/18 fits a lot easier. Stanza H165 > > rear axle fits as well. > > > > Cheers > > Feral Errol > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]]On Behalf Of David Dahl > > Sent: Wednesday, 20 March 2002 11:23 PM > > To: [EMAIL PROTECTED] > > Subject: Re: out goes L16, in goes L20B > > > > Do you know how much hassle it is putting a L20B into > > a nissan sunny '81 model B310, is it just the x-member that needs to be > > changed > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
