yeah, i wouldnt either, but WHO would put rings in a damaged or rough bore? i`m just talking about ya normal motor in sorta normal condition , thats just smokey.
by the way , when i FIRST started to get into engines etc... i re ringed my brothers slant 6 engine, and that had a patch about 4 cm long and about 2-3 cm wide ( corossion due to sitting for a while). and a haf decent ridge ( which i got out with dry rub paper) and that lasted 2 and 1/2 years till we sold it..... so who can say ts gonna last 2 months or 2 years.? mark k ----- Original Message ----- From: "E Smith" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, May 05, 2002 9:17 PM Subject: RE: Looking for a replacement L engine > Maybe it depends on the bore condition (ovality, top ring ridge and > surface). Some engines without bore ridges and not oval may last 2-4 years > if re ringed. If the bore is damaged and rough 2 months may be a very good > result. No one would give 12 months warranty on rings put into a honed, oval > bore with a bloody big ridge above the top ring. > Cheers > Feral Errol > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of mark krawczuk > Sent: Sunday, 5 May 2002 8:02 PM > To: [EMAIL PROTECTED] > Subject: Re: Looking for a replacement L engine > > hi, being dearer doesnt mean that they are always better, . i`ve reringed > about 3 L series, an d few holden 6`s and they`ve all lasted more than 2 > years. one L series on cheap rings (bluebird) lasted 4 and half years. > who says they are designed to last that long?, a month or two? > > how can they last a month or two when they come with warranty ,12 months? > > mark k > > > > ----- Original Message ----- > From: "Terry Rudd" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Sunday, May 05, 2002 1:02 PM > Subject: RE: Looking for a replacement L engine > > > > The bits I've posted are top line street quality - you can buy much > cheaper > > that usually do the job they are designed for (i.e. last a month or 2) > > before you flog the car. > > > > TR > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]]On Behalf Of mark krawczuk > > Sent: Sunday, 5 May 2002 10:23 AM > > To: [EMAIL PROTECTED] > > Subject: Re: Looking for a replacement L engine > > > > > > thats a bit rich, a1 auto parts in adelaide, grand junction road > > (rosewater) have a re ring it for about 100-130 dollars, which > includes > > rings,conrod bearings, all gasets etc..... > > > > mark k > > ----- Original Message ----- > > From: "Terry Rudd" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Saturday, May 04, 2002 11:49 PM > > Subject: RE: Looking for a replacement L engine > > > > > > > You don't even have to pull the engine out to re-ring a L engine (Repco > > > Hastings CM PN 2C6872 - need to check bore). An ACL VRS (DD61414/6MT) > from > > > Repco or Supercheap are $80 or so, always replace the valve guide seals > on > > a > > > L head (included in VRS), rings are a bit more exy ~$110 (trade price) > > last > > > set I bought, you'll need a sump gasket, oil/filter/coolant etc - ~$250 > > > should just about do it. > > > > > > regards > > > Terry > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED]]On Behalf Of mark krawczuk > > > Sent: Saturday, 4 May 2002 11:09 PM > > > To: [EMAIL PROTECTED] > > > Subject: Re: Looking for a replacement L engine > > > > > > > > > hi, they shoud be available just about anywhere,( rings). > > > you should be able to pull out engine, rering it,and put it back in > > the > > > same day,. > > > ii wouldnt bother changing the bearings or whatever, if ts just > smokey, > > > and not making any noises , just put riing s iin. > > > > > > mark k > > > ----- Original Message ----- > > > From: "Leighton" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Saturday, May 04, 2002 5:19 PM > > > Subject: Re: Looking for a replacement L engine > > > > > > > > > > hmm im thinking the time factor though > > > > > > > > but i suppose it wouldnt take much longer to change rings??? > > > > > > > > > > > > where cani get get a set of rings from and any idea where i may be > able > > to > > > > get them > > > > > > > > i suppose any one would stock them > > > > > > > > > > > > thanx > > > > > > > > > > > > leighton > > > > ----- Original Message ----- > > > > From: "mark krawczuk" <[EMAIL PROTECTED]> > > > > To: <[EMAIL PROTECTED]> > > > > Sent: Saturday, May 04, 2002 5:07 PM > > > > Subject: Re: Looking for a replacement L engine > > > > > > > > > > > > > hi, have u thought maybe about buying a set of cheap rings and > > > > throwing > > > > > them in. as long as nothing was making a noise, i would do that. > > > > > i have done it before, even using the same head gasket, if that > > comes > > > of > > > > > clean. > > > > > > > > > > > > > > > mark k > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > From: "Leighton" <[EMAIL PROTECTED]> > > > > > To: <[EMAIL PROTECTED]> > > > > > Sent: Saturday, May 04, 2002 3:52 PM > > > > > Subject: Looking for a replacement L engine > > > > > > > > > > > > > > > > Does any one have a dirt cheap and i mean dirt cheap replacement > L18 > > > or > > > > > L20b > > > > > > engine cos mine is blowing tooo much smoke its quite bad actually > it > > > > blows > > > > > > smoke all the time now it used to only do it on accleration and > > stuff > > > > but > > > > > > now oooh boy its very bad its needs a temporary replacement b4 the > > FJ > > > > goes > > > > > > in cos i still need the car for a bit > > > > > > > > > > > > actuall and bottom end only wouldbe just as good > > > > > > > > > > > > thanx > > > > > > > > > > > > Leighton > > > > > > > > > > > > Ps im in melbourne > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
