Hi,
Does anyone know the cam timing for the 180bSSS and it`s valve
clearences?
Thanks,
Kris.
----- Original Message -----
From: "Terry Rudd" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, May 05, 2002 12:30 AM
Subject: RE: Cam grinds
> The original L18SSS cam is a B, or B1 for the Mikuni fed BP 38mm head so
> they work real well with webers and the one I would prefer, and not much
> different to a 66 rally grind, same lift from memory but the SSS has a
> little less duration than the 66 cam. The C are the pollution model copies
> of the B1 and were fitted to L20B engines and they're OK afaik, the A's
were
> fitted to truck/industrial engines.
>
> regards
> Terry
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Ben
> Sent: Sunday, 5 May 2002 5:32 AM
> To: [EMAIL PROTECTED]
> Subject: Re: Cam grinds
>
>
> one is a B and the other is a C...which is the best of the two???
>
> ----- Original Message -----
> From: "Tony Bryant" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Friday, May 03, 2002 5:09 PM
> Subject: Re: Cam grinds
>
>
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
