yeah, porting isnt as a big of a deal with turbo motors, the turbo can just be made to push more air
-----Original Message----- From: "Cleary Signs" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Date: Mon, 8 Jul 2002 12:46:06 +1000 Subject: Re: Z18 Head My mates old L series turbo motor , runs 40mm inlet valves (standard) and 42mm exhaust valves. are L & Z heads same valve size? if it was a twin cam head i would make it the last thing on my engine development, as i've seen hi hp out of motors with no porting at all. just different cams and the right turbo. Heath ----- Original Message ----- From: Tony Bryant <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, July 08, 2002 11:42 AM Subject: Re: Z18 Head > On Sun, 07 Jul 2002 21:57, Andrew Denniss wrote: > > Hi simon porting your head can make a big difference in hp. When Steve > > Newing at speed technology Victoria Ph 03-98735400 ported my head and > > reseated the valves ect we gained nearly 20% more flow that's with bigger > > exhaust valves. > > Was this 20% increase on a Z18 head? > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
