What front bolts do you mean? I thought you just set up your camber on the slotted rear cross member and using large washers either side of the slots, you just tack weld each washer to the cross member to stop things moving. Unless you are changing the camber on a weekly basis this is the way to go, surely? Got that tip out of the Dime Quarterly magazine.
Rob P ----- Original Message ----- From: "maldat" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, December 04, 2002 7:13 AM Subject: Re: Rally question > Nasty crash dude. > > I have looked at himen joints and eyelet ajustable dofers at speed shops and > when i ask about the free play in them they so they dont have any,then I ask > this new one does?O that should be their they reply ....I've looked a couple > of times at different places but always can pick up a sloppy one.... > I'm sticking with factory Nissan parts. > If you wanna have ajustable rear end,The front bolts from a vailant or > falcon ,do work with slotted holes,but can/do come loose (hey but so do the > factory ones) > Malcolm > ----- Original Message ----- > From: "Sandejas, Ignacio" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, December 04, 2002 11:42 AM > Subject: RE: Rally question > > > > These camber pins for the lower control arm... > > > > Are they bad for road use?? > > > > I've seen you guys make the point a few times but I was curious if that > was > > just for competition only, that the problems occur? > > > > -----Original Message----- > > From: Brad Hallett [mailto:[EMAIL PROTECTED]] > > Sent: Tuesday, December 03, 2002 9:47 PM > > To: [EMAIL PROTECTED] > > Subject: RE: Rally question > > > > > > In 15 years I have destroyed 3 P510 shells and one Subaru RX turbo in > > rallies. The first car I rolled was end for end and I had a 2 inch 4 > > point harness with bolt in aluminium cage. After that first experience I > > refuse to race a car unless it has weld in steel cage with intrusion > > bars and a 3 inch 5 point harness. The 2 inch harness cut my shoulders > > and stretched during each impact and the cage flexed and moved with the > > crush of the pillars, very dangerous. Interesting point is that crash > > was caused by an adjustable lower control arm pin breaking as I pulled > > 5th on a long straight. Don't use these adjustable camber pins they are > > accidents waiting to happen > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]] On Behalf Of nat P. > > Sent: Tuesday, 3 December 2002 3:31 PM > > To: [EMAIL PROTECTED] > > Subject: RE: Rally question > > > > > > Well I got the 5 point ( Cos they are cool!!) And for > > safety reasons.... Hmmm anywoo, I would say definitely > > a no no BUT other people will say they are O.K... BUT > > Na! I dont believe so, They are cheap shit!! > > Cheers NAT > > > > > > --- "HARVEY,Alex" <[EMAIL PROTECTED]> wrote: > > > Rightyo I'll definitely take note of that. When you > > > say only use 3inch > > > harnesses, does that mean the 2inch harnesses are a > > > definate no no...? > > > Also is it worthwhile getting the 5 point so I can > > > have the crutch strap > > > (for safety reasons of course).. > > > > > > Cheers > > > > > > Alex > > > > > > -----Original Message----- > > > From: nat P. [mailto:[EMAIL PROTECTED]] > > > Sent: Tuesday, December 03, 2002 3:12 PM > > > To: [EMAIL PROTECTED] > > > Subject: RE: Rally question > > > > > > > > > Would love to! BUT its just too far away!!! We only > > > do > > > the state and Club rounds, (VRC, VCRS). The cost of > > > running these is fairly HUGE!! Driving that far is > > > just out of our budget. > > > > > > The only thing I do recommend is that you buy THE > > > BEST > > > you can afford!!!! Cos if you dont you end up buying > > > things twice!!!! (Like it did!!!) Eg. Dont buy > > > pedders > > > or Munroe, BUY koni! ONCE!!! It will cost you more > > > now > > > BUT save you thousands later!!!!! > > > > > > Dont worry too much about the engine! Spend your > > > money > > > on suspension and safety gear! E.G Harnesses, BUY 3 > > > inch only!! Non plastic buckle type(The metal type!) > > > > > > You've got the brakes, so you are sweet! Use Metal > > > kings in the front and rear! > > > Buy the BEST CAGE YOU CAN GET!!!!!! PROFESSIONAL > > > WELDED IN ONLY!!!! -Approx $2000 > > > Remember its your life!!! Your body!!!! I've rolled > > > a > > > couple of times and I'll tell ya each time I'm glad > > > I > > > spent the money!!!!! > > > > > > Run with this for a long as you can and save/ build > > > a > > > new motor on the side!!! > > > > > > That way you are doing everything!! > > > Cheers NAT > > > > > > > > > > > > > > > --- "HARVEY,Alex" <[EMAIL PROTECTED]> wrote: > > > > > > > Thanks Nat. I wont be at the BBQ Thursday as I live > > > > in Canberra, it > > > > would be a fair whack of mileage considering I > > > would > > > > have to be back at > > > > work on Friday morning!:) Do you do many > > > interstate > > > > rallies? Ie, the > > > > Nat Cap rally in Canberra??? > > > > > > > > Cheers > > > > Alex > > > > > > > > -----Original Message----- > > > > From: nat P. [mailto:[EMAIL PROTECTED]] > > > > Sent: Tuesday, December 03, 2002 12:22 PM > > > > To: [EMAIL PROTECTED] > > > > Subject: RE: Rally question > > > > > > > > > > > > Na!!!! Try to keep the car as basic as possible, > > > for > > > > the less things you have, the less things that you > > > > can break!!!! Are you > > > > coming to the BBQ on Thursday night? It's in > > > > MELBOURNE?? Cos I'll be > > > > there will my rally car and I'll answer every > > > > question for you! > > > > > > > > BUT to answer your first question... You can do > > > > without them!!.. For awhile.. hehehe > > > > Build the car in this order!! > > > > 1. Safety > > > > 2. brakes > > > > 3. Suspenion > > > > 4. Motor/ gearboxes/ diff ratios! > > > > > > > > Cheers NAT > > > > Ask anytime!!! > > > > > > > > > > > > > > > > > > > > --- "HARVEY,Alex" <[EMAIL PROTECTED]> > > > wrote: > > > > > > > > > Thanks for the advice folks - much appreciated. > > > > > We are basically building this car for rally > > > from > > > > > scratch, the darting > > > > > issue was happening on the road. The car is > > > > pretty > > > > > much stock with > > > > > exception for the 240k struts, so no adjustable > > > > > radius rods or control > > > > > arms as yet. Would these be a necessity for a > > > > first > > > > > time rally > > > > > experience or do you think it could be something > > > I > > > > > could add a bit > > > > > further on down the track?? (so to speak:) > > > > > > > > > > Cheers > > > > > Alex > > > > > > > > > > > > > http://www.yahoo.promo.com.au/hint/ - Yahoo! Hint > > > > Dropper > > > > - Avoid getting hideous gifts this Christmas with > > > > Yahoo! Hint Dropper! > > > > > > > > > > > > > --membersozdat------------------------------------------------------- > > > > OZDAT Mailing List Please Note:- > > > > Send (un)subscribe requests to > > > > [EMAIL PROTECTED] Send > > > > submissions to [EMAIL PROTECTED] No unauthorised > > > > redistribution of this email > > > > http://www.ozdat.com/ozdatonline/index.htm > > > > http://www.ozdat.com/ozdatonline/listindex.html > > > > > > > > > http://www.mail-archive.com/[email protected]/ > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > Notice: > > > > The information contained in this e-mail message > > > and > > > > any attached files may > > > > be confidential information, and may also be the > > > > subject of legal > > > > professional privilege. If you are not the > > > intended recipient any > > > > use, disclosure or copying of this e-mail is > > > > unauthorised. If you have received > > > > this e-mail in error, please notify the sender > > > > immediately by reply e-mail > > > > and delete all copies of this transmission > > > together > > > > with any attachments. > > > > > > > > > > > > > > > > > > > > > --membersozdat------------------------------------------------------- > > > > OZDAT Mailing List Please Note:- > > > > Send (un)subscribe requests to > > > > [EMAIL PROTECTED] > > > > Send submissions to > > > [EMAIL PROTECTED] > > > > No unauthorised redistribution of this email > > > > http://www.ozdat.com/ozdatonline/index.htm > > > > http://www.ozdat.com/ozdatonline/listindex.html > > > > > > > > > http://www.mail-archive.com/[email protected]/ > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > > http://www.yahoo.promo.com.au/hint/ - Yahoo! Hint > > > Dropper > > > - Avoid getting hideous gifts this Christmas with > > > Yahoo! Hint Dropper! > > > > > > > > --membersozdat------------------------------------------------------- > > > OZDAT Mailing List Please Note:- > > > Send (un)subscribe requests to > > > [EMAIL PROTECTED] Send > > > submissions to [EMAIL PROTECTED] No > > > unauthorised > > > redistribution of this email > > > http://www.ozdat.com/ozdatonline/index.htm > > > http://www.ozdat.com/ozdatonline/listindex.html > > > > > http://www.mail-archive.com/[email protected]/ > > > > > --------------------------------------------------------------------- > > > > > > Notice: > > > The information contained in this e-mail message and > > > any > > === message truncated === > > > > http://www.yahoo.promo.com.au/hint/ - Yahoo! Hint Dropper > > - Avoid getting hideous gifts this Christmas with Yahoo! Hint Dropper! > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
