Im upgrading for efi in the 1600! Im going to change the suply line to 5/16 as everyone recomends.
I assume this means getting bundy tubing with 5/16 ID. I am just confused as the blackwoods catalogue measures it by the outside diameter. however the bundy with the 5/16 ID~8mm) had an OD of about 9.5mm plus a flaring on the end of the hose would mean using bigger than 5/16 rubber efi fuel hose. also when selecting brass fittings im unsure how they are measured. i was looking at what i was told was a 5/16 (~8mm) fitting yet it had a 5mm inside diameter. So i assume they are sized by the hose they fit into???? i would guess the smaller size of the fitting would kill fuel flow. Thanks very much guys any help would be much appreciated Chris King Ps. does anyone know the sizes of the standard tank supply and return fittings. --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
