i'll find out what pin no. it is, but i know it needs 12V+ at cranking (now i think about it, that was for fuel, one as it doubles the fuel load at start up). 1 of the pins on computer needs 12v all the time. bypass all ignition etc. do you have the CA manual? 25meg PDF. Mark who did the wiring harness?
heath ----- Original Message ----- From: "Mark Firman" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, May 16, 2004 8:34 PM Subject: Re: CA18DET won't start... again > I pulled the crank angle sensor off and span it with the ignition on and i > could hear injectors ticking away but there was definantly no spark :( It's > got me a bit stumped! Anyone got any ideas?? > Thanks, > Mark Firman > > ----- Original Message ----- > From: "Cameron Stean" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Sunday, May 16, 2004 1:02 PM > Subject: RE: CA18DET won't start... again > > > > check to see if the crank angle sensor is sending signals to the ecu. > > > > > > >From: "Mark Firman" <[EMAIL PROTECTED]> > > >Reply-To: [EMAIL PROTECTED] > > >To: "OZDAT" <[EMAIL PROTECTED]> > > >Subject: CA18DET won't start... again > > >Date: Sun, 16 May 2004 10:49:27 +1000 > > > > > >Hi, > > >It's just problem after problem with my car! I hooked up my surge tank > and > > >pump and got my fuel system all finished and looking good - but now the > > >thing won't spark! > > >It turns over and has fuel pumping in, but it won't spark until you let > the > > >key back off the cranking position...... > > >We checked the power at all the relays in case the 1600 barrel wasn't > > >letting 12v through when in the start position but that wasn't it, power > is > > >there but it just isn't sparking.. > > >It has done this before a few months ago when i was trying to get it > > >started, and from memory all i did was take the plugs out and clean them > up > > >and then noticed that they sparked when i turned it over, so i put them > > >back in and off she went. I've tried that this time but it was no help... > > >it seems like it could be one of those annoying intermittant problems :( > > >If anyone has any ideas or suggestions of what i should try to get it > going > > >again that would be really appreciated. I am close to getting the thing > on > > >the road now, only not if it wont start!! > > >Thanks, > > >Mark Firman > > > > > > > _________________________________________________________________ > > SEEK: Now with over 50,000 dream jobs! Click here: > > http://ninemsn.seek.com.au?hotmail > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
