I had to slot the mounting hole to get mine in. Plus the mounting points need to be cut off and welded on the other side. I didn't do it myself so someone else could elaborate.
Iggy On 21/3/05 7:07 AM, "Mohit K. Autar" <[EMAIL PROTECTED]> wrote: > > Hi guys, > > I have a problem and i need ideas.im fitting a FJ20 in my 510 and i removed > the cross member yesterday and tried to fit it the other way around.but only > the two no.14 bolts line up first as i have to make the hole slightly bigger > for the other two holes.is that normal with you guys. > > Now how do i fit the lower arm.as its bolt which fits one way and it cant fit > from the other side.what i think is ,do i have to make the hole bigger on the > rear end and on the front side i have weld a washer of the size of the bolt to > keep it in place. > > > cheers > mohit. > > No virus found in this outgoing message. > Checked by AVG Anti-Virus. > Version: 7.0.308 / Virus Database: 266.7.4 - Release Date: 18/03/2005 > -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.7.4 - Release Date: 18/03/2005 --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [email protected] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ --------------------------------------------------------------------- -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.7.4 - Release Date: 18/03/2005
