has anyone got a cross member keft in the garage to suit fj20.
mohit.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Ignacio
Sandejas
Sent: Monday, March 21, 2005 12:12 PM
To: [email protected]
Subject: Re: Cross member...
I had to slot the mounting hole to get mine in. Plus the mounting points
need to be cut off and welded on the other side. I didn't do it myself so
someone else could elaborate.
Iggy
On 21/3/05 7:07 AM, "Mohit K. Autar" <[EMAIL PROTECTED]> wrote:
>
> Hi guys,
>
> I have a problem and i need ideas.im fitting a FJ20 in my 510 and i removed
> the cross member yesterday and tried to fit it the other way around.but only
> the two no.14 bolts line up first as i have to make the hole slightly bigger
> for the other two holes.is that normal with you guys.
>
> Now how do i fit the lower arm.as its bolt which fits one way and it cant fit
> from the other side.what i think is ,do i have to make the hole bigger on the
> rear end and on the front side i have weld a washer of the size of the bolt to
> keep it in place.
>
>
> cheers
> mohit.
>
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.7.4 - Release Date: 18/03/2005
>
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.7.4 - Release Date: 18/03/2005
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.7.4 - Release Date: 18/03/2005
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [email protected]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed. If
you have received this mail in error, please notify the System Administrator.
Please note that any views or opinions presented in this mail are solely those
of the author and do not necessarily represent those of the Institute. Finally
the recipient should check this mail and any attachment for the presence of
viruses. FIT has a virus detection in place and makes every reasonable effort
to ensure that this message is free from viruses. FIT accepts no liability for
any damage caused by any virus transmitted by this mail
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.7.4 - Release Date: 18/03/2005
