RE: sr20de speedo sensor engine cut out.

Dr Drift Sat, 20 May 2006 19:25:21 -0700

I use heaps of the PLMS boards when remapping SR’s… They’re the only ones that work flawlessly with my emulator to tune them in real time on the dyno. There’s quite a few ‘mines’ or other maps around, but nothing beats tuning it in real time.

From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of turbochris
Sent: Sunday, 21 May 2006 7:14 AM
To: [email protected]
Subject: Re: sr20de speedo sensor engine cut out.

I have a PLMS daughterboard with the 4 switchable maps.

Chris

On 5/20/06, The Cleary's <[EMAIL PROTECTED] > wrote:

Chris what chip do you have?

i have a revision 3 mines chip in mine,

i had a TNT chip, but this one has alot more fuel

this is from Kev, which i think was originally from Martin/ Peter in SA

Heath

----- Original Message -----

From: turbochris

To: [email protected]

Sent: Saturday, May 20, 2006 9:20 AM

Subject: Re: sr20de speedo sensor engine cut out.

Pretty common problem on SRs. Pete Liebig in Adelaide fixed mine up with a chip with speed cut removed. Bonus was that it included hot maps for more power too. Now I can get to 200 down Wakefield park straight :o)

I can give you details off list if you like.

Cheers,

Chris

On 5/19/06, The Cleary's <[EMAIL PROTECTED] > wrote:

Jeff,

i don't know, but if you can;t fix it, i'll give you Kev Rowley's ph no.

he did my wiring for the CA into the 1200, i'm using a series 3 bluebird speedo

drive (pulled out the electronic one) with original 1200 speedo,

he does alot of this sort of thing.

Heath

----- Original Message -----

From: Jeff

To: [email protected]

Sent: Friday, May 19, 2006 8:05 PM

Subject: sr20de speedo sensor engine cut out.

the sr20de is sitting in the engine bay of the 1600, hoping to be running again next week :)

I have a question about the speedo sensor.

I have been told that there is some kind of problem with the engine cutting out at about 6500 rpm

due to a signal not going from the actual speedo back to the engine computer.

can anyone tell me if I need the actual speedo from the s13 dash or is there some other fix for this.

Thanks Jeff

--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [email protected]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

RE: sr20de speedo sensor engine cut out.

Reply via email to