say sam when your is brisbane what dyno do you use ??? my mates are about to
buy a dyno for there toys set up at there house has shootout and all on it
and there datto nuts
From: "Dr Drift" <[EMAIL PROTECTED]>
Reply-To: [email protected]
To: <[email protected]>
Subject: RE: sr20de speedo sensor engine cut out.
Date: Sun, 21 May 2006 12:15:37 +1000
I use heaps of the PLMS boards when remapping SR's. They're the only ones
that work flawlessly with my emulator to tune them in real time on the
dyno.
There's quite a few 'mines' or other maps around, but nothing beats tuning
it in real time.
_____
From: [email protected]
[mailto:[EMAIL PROTECTED] On Behalf Of turbochris
Sent: Sunday, 21 May 2006 7:14 AM
To: [email protected]
Subject: Re: sr20de speedo sensor engine cut out.
I have a PLMS daughterboard with the 4 switchable maps.
Chris
On 5/20/06, The Cleary's <[EMAIL PROTECTED] > wrote:
Chris what chip do you have?
i have a revision 3 mines chip in mine,
i had a TNT chip, but this one has alot more fuel
this is from Kev, which i think was originally from Martin/ Peter in SA
Heath
----- Original Message -----
From: turbochris <mailto:[EMAIL PROTECTED]>
To: [email protected]
Sent: Saturday, May 20, 2006 9:20 AM
Subject: Re: sr20de speedo sensor engine cut out.
Pretty common problem on SRs. Pete Liebig in Adelaide fixed mine up with a
chip with speed cut removed. Bonus was that it included hot maps for more
power too. Now I can get to 200 down Wakefield park straight :o)
I can give you details off list if you like.
Cheers,
Chris
On 5/19/06, The Cleary's <[EMAIL PROTECTED] > wrote:
Jeff,
i don't know, but if you can;t fix it, i'll give you Kev Rowley's ph no.
he did my wiring for the CA into the 1200, i'm using a series 3 bluebird
speedo
drive (pulled out the electronic one) with original 1200 speedo,
he does alot of this sort of thing.
Heath
----- Original Message -----
From: Jeff <mailto:[EMAIL PROTECTED]>
To: [email protected]
Sent: Friday, May 19, 2006 8:05 PM
Subject: sr20de speedo sensor engine cut out.
the sr20de is sitting in the engine bay of the 1600, hoping to be running
again next week :)
I have a question about the speedo sensor.
I have been told that there is some kind of problem with the engine cutting
out at about 6500 rpm
due to a signal not going from the actual speedo back to the engine
computer.
can anyone tell me if I need the actual speedo from the s13 dash or is
there
some other fix for this.
Thanks Jeff
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [email protected]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.8.2/357 - Release Date: 6/06/2006
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [email protected]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.8.2/357 - Release Date: 6/06/2006
