at the moment i have a T25g on it, at 10psi, i have to sort the rear end first, before i worry about the T28 (brand new sitting on shelf ready to go) as i have to sort out the axle tramp 1st 2nd and 3rd, Kev's ran a 12.7 @ 110mph, same setup as me, but at 14psi i'm going to setup Kaltrek for the rear, a friend did it for his bosses FJ 1200 ute, i have to remove some springs as my rear is too stiff, and soften the koni's as well
Heath ----- Original Message ----- From: "Terry Rudd" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, June 12, 2006 10:24 PM Subject: RE: max hp out of T28 > Nothing much wrong with the CA either, I'd like to put one in a 1600 one > day, a wagon for a change would be a bit of challenge - a T28 will be a > sweet upgrade. > Terry > > -----Original Message----- > From: [email protected] > [mailto:[EMAIL PROTECTED] On Behalf Of The Cleary's > Sent: Monday, 12 June 2006 10:06 PM > To: [email protected] > Subject: Re: max hp out of T28 > > > yerr i like the FJ's > they make some serious grunt, > but all i'm legally allowed is the CA, > my mate has a few 1200's utes with FJ's, > > Heath > > ----- Original Message ----- > From: "Terry Rudd" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Monday, June 12, 2006 8:56 PM > Subject: RE: max hp out of T28 > > > > Heath, > > > > T28 is usually fine for 250-280 hp on most SR's. Hybrids will still > > give > you > > more than that but that's driveable on the street. > > > > Regards, > > Terry (not a SR person, as FJ's still haul ass) > > > > -----Original Message----- > > From: [email protected] > > [mailto:[EMAIL PROTECTED] On Behalf Of The > > Cleary's > > Sent: Monday, 12 June 2006 8:48 PM > > To: [email protected] > > Subject: max hp out of T28 > > > > > > HI List > > does any know the approx max hp out of T28 (14411-75F00) that's been > high > > flowed, with a Super 60 comp wheel. both .6 A/R's, stock flows 31 lb? > > / super 60 36 lb? > > > > > > thanks > > Heath > > ----- Original Message ----- > > From: "Andrew Smith" <[EMAIL PROTECTED]> > > To: <[email protected]> > > Sent: Sunday, June 11, 2006 8:35 AM > > Subject: Re: actuator & gasket question > > > > > > > I usually set the actuator rod hole up so that its around 3mm short > > > of the closed flap. The factory gasket is the go.I also get one thru > > > coventrys thats as good > > as > > > the factory one but not sure on the brand.It has that same shinney > > > grey stuff that like glues itself with heat. > > > ----- Original Message ----- > > > From: "Adam Jackson" <[EMAIL PROTECTED]> > > > To: <[email protected]> > > > Sent: Saturday, June 10, 2006 8:54 PM > > > Subject: actuator & gasket question > > > > > > > > > > I've got a new wastegate actuator for a new turbo and i'm not sure > > > > how tight the wastegate should be set? Tight as possible or simply > > > > closed? > > > > > > > > Also with re to gaskets on the exhaust manifold (sr20det) i've > > > > gone to > > two > > > > different places and both could only supply cardboard/paper > > > > gaskets to suit the sr20det. Would this gasket cause any problems? > > > > > > > > cheers, > > > > Adam > > > > > > > > www.sr510.com > > > > > > > > > > > > > > > > -- > > > > No virus found in this incoming message. > > > > Checked by AVG Free Edition. > > > > Version: 7.1.394 / Virus Database: 268.8.3/360 - Release Date: > > > > 9/06/2006 > > > > > > > > > > > > > > > > -- > > > > No virus found in this outgoing message. > > > > Checked by AVG Free Edition. > > > > Version: 7.1.394 / Virus Database: 268.8.3/360 - Release Date: > > > > 9/06/2006 > > > > > > > > > > > > > > > > > > > -- > > > No virus found in this incoming message. > > > Checked by AVG Free Edition. > > > Version: 7.1.394 / Virus Database: 268.8.3/360 - Release Date: > > > 9/06/2006 > > > > > > > > > > > > -- > > > No virus found in this outgoing message. > > > Checked by AVG Free Edition. > > > Version: 7.1.394 / Virus Database: 268.8.3/360 - Release Date: > > > 9/06/2006 > > > > > > > > > > > > > -- > > No virus found in this incoming message. > > Checked by AVG Free Edition. > > Version: 7.1.394 / Virus Database: 268.8.3/361 - Release Date: > > 11/06/2006 > > > > --membersozdat------------------------------------------------------- > > OZDAT Mailing List Please Note:- > > Send (un)subscribe requests to [EMAIL PROTECTED] Send > > submissions to [email protected] No unauthorised > > redistribution of this email > > http://www.ozdat.com/ozdatonline/index.htm > > http://www.ozdat.com/ozdatonline/listindex.html > > http://www.mail-archive.com/[email protected]/ > > --------------------------------------------------------------------- > > > > > > -- > > No virus found in this outgoing message. > > Checked by AVG Free Edition. > > Version: 7.1.394 / Virus Database: 268.8.3/361 - Release Date: > > 11/06/2006 > > > > > > > > > > > > > > > > -- > > No virus found in this incoming message. > > Checked by AVG Free Edition. > > Version: 7.1.394 / Virus Database: 268.8.3/361 - Release Date: > > 11/06/2006 > > > > > > > > -- > > No virus found in this outgoing message. > > Checked by AVG Free Edition. > > Version: 7.1.394 / Virus Database: 268.8.3/361 - Release Date: > > 11/06/2006 > > > > > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.394 / Virus Database: 268.8.3/361 - Release Date: 11/06/2006 > > --membersozdat------------------------------------------------------- > OZDAT Mailing List Please Note:- > Send (un)subscribe requests to [EMAIL PROTECTED] Send > submissions to [email protected] No unauthorised > redistribution of this email http://www.ozdat.com/ozdatonline/index.htm > http://www.ozdat.com/ozdatonline/listindex.html > http://www.mail-archive.com/[email protected]/ > --------------------------------------------------------------------- > > > -- > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.1.394 / Virus Database: 268.8.3/361 - Release Date: 11/06/2006 > > > > > > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.394 / Virus Database: 268.8.3/361 - Release Date: 11/06/2006 > > > > -- > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.1.394 / Virus Database: 268.8.3/361 - Release Date: 11/06/2006 > -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.8.3/362 - Release Date: 12/06/2006 --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [email protected] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ --------------------------------------------------------------------- -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.8.3/362 - Release Date: 12/06/2006
