Here you go, Randy. http://www.autohausaz.com/search/product.aspx?sid=b3tbpv45pvq2g4mclkt5ua2m&makeid=800016@Mercedes&modelid=1193666@300D&year=1976&cid=master cylinder@master cylinder&gid=1836@Brake Master Cylinder
On Thu, Jun 11, 2015 at 4:12 PM, fmiser via Mercedes <mercedes@okiebenz.com> wrote: > > Randy wrote: > > > > It brakes but not very hard and pumping the pedal does not > > all that much to make it better. > > > > It feels like when one presses on the pedal while another > > bleeds the brakes. It just slowly descends until close to > > the floor. > > > If not, then I suspect the master cylinder is leaking > > internally. > > That is the classic symptom of master cylinder failing. > Fluid getting past the main seals. > > Often, if you move the pedal hard and fast it will still > "catch" and once there is pressure the seals usually seal. A > slow, gentle press will allow the pedal to sink to the floor. > > > If so, is there a kit to repair or am I compelled to > > replace the whole thing? > > I failed to find a kit. But I did not check with Classic > Center. And I have 123s, not 115s. > > > In either case, where would one best look for parts? > > Rusty. > > Oh yeah. *sigh* > > I'll bet Dan will say "a dealer". I would try to figure out > the brand of the OEM (Bendix? ATE? Or is that just slaves?) > and then use RockAuto, AutohauseAZ, FLAPs, etc. > > _______________________________________ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com