Elective surguries are not covered under health insurance.  For the record, 
while health insurance is covered in part by the federal government, they 
are all administered at the provincial levels.

I had already resigned myself to pulling the whole assembly from the bottom. 
While under the car, I noticed an oil leak, and traced it up to the CAS 
gasket, which is hopefully the only leak.  The fun never ends.  I've had 2 
miatas, and both of them failed in all the traditional ways.  Name a common 
problem with the early cars, and I've dealt with it, minus the crankshaft 
pulley wobble.  Knock on wood.

Before I pull the starter, I'm going to spend the evening testing voltages 
and playing with my test light as best I can.

Thanks for the tips.

Matt


----- Original Message ----- 
From: "Bill Cardell" <[EMAIL PROTECTED]>
To: "Matthew Goertz" <[EMAIL PROTECTED]>; <[email protected]>
Sent: Thursday, April 17, 2008 5:52 PM
Subject: RE: Intermittent power content


Depends. Is that covered under your national medical insurance?
Just pull the starter out from the bottom.


Bill Cardell
TurboDog's Dad
www.flyinmiata.com
1-800-FLY-MX5S (sales)
970-464-5600 (tech)
2008 FM Open House: August 14-17

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Matthew Goertz
Sent: Thursday, April 17, 2008 3:02 PM
To: [email protected]
Subject: Re: Intermittent power content

Am I correct to assume the easiest/fastest way to get at the starter
solenoid is to remove the intake?  Or should I just have a few extra
elbows surgically installed?

Cheers!

Matt

_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower


-- 
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 269.23.0/1383 - Release Date: 4/17/2008 
9:00 AM


_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to