I would go before the intake sensor in the ss tube. FWIW, I saw a peak IAT of 32C at Thunderhill at 16.5psi on the Westie with WI. A couple weeks earlier with no ic and iat before the water nozzle I was seeing 160C! With no knock...
Bill Cardell TurboDog's Dad www.flyinmiata.com 1-800-FLY-MX5S (sales) 970-464-5600 (tech) 2008 FM Open House: August 14-17 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, April 28, 2008 12:20 PM To: MiataPower Subject: Question regarding installation of Water Injection kit Where is a good place to install the WI nozzles? Should I weld on some bungs to the top of the IC? Since I have silicone intake hoses the only other option is to tap the stainless steel tube where the AIT is located or weld in some bungs into the intake manifold, but that is AFTER the intake temps are read. Thanks, Mike _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
