I've been trying to fix belt squeal at startup on my Miata for a while, without much luck.
Originally, it only happened at startup when the engine was cold. Gradually, it started happening more often, and lasting longer (first 5-10 seconds). I replaced the belts (it's the water pump/alternator belt doing it, because it did it with the PS belt off, and not with the water pump belt off). That made it go away for a couple weeks, but then it started coming back. I've checked the tension, and it appears to be fine. It's getting worse to the point where now it'll squeal at low RPM when pulling away from a stop sign as well, even when things are warmed up. Any thoughts? Is it possible that it's resulting from excessive load from the alterator and/or water pump? I'm a little suspicious of the alternator, because the voltage sags substantially with lots of electrical load. Idle voltages can be as high as 14.5 with no electrical loads, or as low as 11.5 if I've got everything on (blower, head/brake lights, defroster, etc). Also, voltage droops into the 11-12 range at high RPM (say 6K) at full boost. On an open freeway onramp at night, the headlights dim noticably as the RPM rises. Did an alternator test with Autozone's machine, they said it was fine. Of course, they did it at 2000 RPM, not at idle. The car is a 99, 80K miles, FM2 for 50K of those, currently using a Hydra. The Hydra says it's driving the alternator as hard as it'll go, although I haven't actually checked the voltage on the control wire to see if it's telling the truth. The alternator is original, the water pump has approx 20K miles on it. --Ian _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
