Not my experience on a glazed belt, Larry but fine.  Remember I said a 
spritz.


----- Original Message ----- 
From: "Bob Hotaling" <[EMAIL PROTECTED]>
To: "Larry Alster" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>; "'Bill Cardell'" 
<[EMAIL PROTECTED]>
Cc: <[email protected]>
Sent: Friday, August 08, 2008 8:00 PM
Subject: Re: belt squeal & alternator voltage


> Might want to consider a spritz of water instead of brake fluid.  It does
> about the same thing and does not fling off to bubble the paint.
>
>
> ----- Original Message ----- 
> From: "Larry Alster" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>; "'Bill Cardell'" <[EMAIL PROTECTED]>
> Cc: <[email protected]>
> Sent: Friday, August 08, 2008 7:56 PM
> Subject: RE: belt squeal & alternator voltage
>
>
> Slipping glazes the belt.  Just a few minutes of running a belt slipping
> could glaze it. That's why I suggested trying a little brake fluid on it 
> to
> see if it changes the noise.  It adds some grip.  Silly questions, your
> alternator and water pump pulleys turn freely and easily without the belt
> on?  Also your crank pulley isn't wobbling??
>
>
>
> Larry
>
> White Knight 1991 Crystal White #99 CSP
> Silver Bullet 1992 Silverstone #17 SM2 FM I+ Turbo
> Honey B 1992 Sunburst Yellow #99 SM2L JR Supercharger
> Whooosh 2004 Titanium Mazdaspeed MX-5
>
> LowCountry Miata http://www.lowcountrymiataclub.net
> Masters Miata
> RAGS 074
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Ian McCloghrie
> Sent: Friday, August 08, 2008 7:49 PM
> To: Bill Cardell
> Cc: [email protected]
> Subject: Re: belt squeal & alternator voltage
>
> On Aug 8, 2008 "Bill Cardell" wrote:
>> I'm with Larry about glazed belt, but double check that the a/c
>> compressor isn't always running. Also, have you talked to Jeremy about
>> the alt control? Besides the PWM map, you also have PID parameters to
>> play with.
>
> It's definitely not the AC compressor running all the time (verified
> by running w/o AC belt, also the effect on the idle when the
> compressor kicks in is not subtle).
>
> I replaced the belt once -- that fixed it for a week or two.  What
> glazes belts?  Is it possible to glaze one that quickly?
>
> I've talked to Jeremy about the alternator control a couple of times,
> although I haven't played with the PID settings.  Do they happen
> "before" or "after" the PWM map?  That is, does it the PID circuit
> pick where on the map to use, or does it take the output of the map
> and then use PID to try to make the alternator match up to it?
>
> --Ian
> _______________________________________________
> Miatapower mailing list
> [email protected]
> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
>
> _______________________________________________
> Miatapower mailing list
> [email protected]
> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
>
> _______________________________________________
> Miatapower mailing list
> [email protected]
> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
> 

_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to