Slipping glazes the belt. Just a few minutes of running a belt slipping could glaze it. That's why I suggested trying a little brake fluid on it to see if it changes the noise. It adds some grip. Silly questions, your alternator and water pump pulleys turn freely and easily without the belt on? Also your crank pulley isn't wobbling??
Larry White Knight 1991 Crystal White #99 CSP Silver Bullet 1992 Silverstone #17 SM2 FM I+ Turbo Honey B 1992 Sunburst Yellow #99 SM2L JR Supercharger Whooosh 2004 Titanium Mazdaspeed MX-5 LowCountry Miata http://www.lowcountrymiataclub.net Masters Miata RAGS 074 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ian McCloghrie Sent: Friday, August 08, 2008 7:49 PM To: Bill Cardell Cc: [email protected] Subject: Re: belt squeal & alternator voltage On Aug 8, 2008 "Bill Cardell" wrote: > I'm with Larry about glazed belt, but double check that the a/c > compressor isn't always running. Also, have you talked to Jeremy about > the alt control? Besides the PWM map, you also have PID parameters to > play with. It's definitely not the AC compressor running all the time (verified by running w/o AC belt, also the effect on the idle when the compressor kicks in is not subtle). I replaced the belt once -- that fixed it for a week or two. What glazes belts? Is it possible to glaze one that quickly? I've talked to Jeremy about the alternator control a couple of times, although I haven't played with the PID settings. Do they happen "before" or "after" the PWM map? That is, does it the PID circuit pick where on the map to use, or does it take the output of the map and then use PID to try to make the alternator match up to it? --Ian _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
