Did mine without the press, substituted gear pulley and torch.

Wallyman




                                                                       
             "John Hammer"                                             
             <[EMAIL PROTECTED]                                   
             m>                                                         To
             Sent by:                        "Larry Alster"            
             [EMAIL PROTECTED]         <[EMAIL PROTECTED]>         
             apower.net                                                 cc
                                             [email protected] 
                                                                   Subject
             10/27/2008 10:08 AM             RE: replacing wheel bearings
                                                                       
                                                                       
                                                                       
                                                                       
                                                                       
                                                                       




I've done rears; they're a pain in the butt, but not THAT tough to do.
Yes, you need a press to do the job, but Larry's 1.3 hours per side sounds
right.

John Hammer

Creative Director
SaySomethingImportant.com

Occasional Racecar Driver

 -------- Original Message --------
 Subject: RE: replacing wheel bearings
 From: "Larry Alster" <[EMAIL PROTECTED]>
 Date: Thu, October 23, 2008 7:24 pm
 To: <[EMAIL PROTECTED]>, "'Michael Knudson'" <[EMAIL PROTECTED]>
 Cc: [email protected]

 Might be just me but that price for the rear bearings sounds a little
 steep.
 My labor book says 1.3 hours per side. Online sells the bearings for 31
 each.



 Larry

 White Knight      1991 Crystal White   #99 CSP
 Silver Bullet        1992 Silverstone     #17 SM2  FM I+ Turbo
 Honey B             1992 Sunburst Yellow #99 SM2L  JR Supercharger
 Whooosh           2004 Titanium Mazdaspeed MX-5

 LowCountry Miata  http://www.lowcountrymiataclub.net
 Masters Miata
 RAGS 074

 -----Original Message-----
 From: [EMAIL PROTECTED]
 [mailto:[EMAIL PROTECTED] On Behalf Of Ian McCloghrie
 Sent: Thursday, October 23, 2008 7:17 PM
 To: Michael Knudson
 Cc: [email protected]
 Subject: Re: replacing wheel bearings

 On Oct 23, 2008 Michael Knudson wrote:
 > One of the guys I AutoX with was saying that basically with how hard
 > they are pushed under racing conditions that they never get a chance to
 > make any noise and instead just fail. He even had this happen at one of
 > the last AutoX events this year. No noise on the 100 mile drive to the
 > event and after the second or third run it failed. Ended up trailering
 > the car back to his house to fix it.

 Yikes. Given what I've read, I think I've decided that it's time to
 do all four as preventative maintenance if nothing else. I'll do the
 fronts myself (ordered parts from Mazda competition - $116 per hub)
 and taking it to a shop for the rears. I got a couple of quotes for
 $400-450 P+L for the rears.

 --Ian
 _______________________________________________
 Miatapower mailing list
 [email protected]
 http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

 _______________________________________________
 Miatapower mailing list
 [email protected]
 http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
 _______________________________________________
 Miatapower mailing list
 [email protected]
 http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

<<inline: graycol.gif>>

<<inline: pic24370.gif>>

<<inline: ecblank.gif>>

_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to