Might be just me but that price for the rear bearings sounds a little steep.
My labor book says 1.3 hours per side.  Online sells the bearings for 31
each.



Larry
 
White Knight      1991 Crystal White   #99 CSP
Silver Bullet        1992 Silverstone     #17 SM2  FM I+ Turbo
Honey B             1992 Sunburst Yellow #99 SM2L  JR Supercharger
Whooosh           2004 Titanium Mazdaspeed MX-5
 
LowCountry Miata  http://www.lowcountrymiataclub.net
Masters Miata
RAGS 074

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ian McCloghrie
Sent: Thursday, October 23, 2008 7:17 PM
To: Michael Knudson
Cc: [email protected]
Subject: Re: replacing wheel bearings 

On Oct 23, 2008 Michael Knudson wrote:
> One of the guys I AutoX with was saying that basically with how hard 
> they are pushed under racing conditions that they never get a chance to 
> make any noise and instead just fail.  He even had this happen at one of 
> the last AutoX events this year.  No noise on the 100 mile drive to the 
> event and after the second or third run it failed. Ended up trailering 
> the car back to his house to fix it.

Yikes.  Given what I've read, I think I've decided that it's time to
do all four as preventative maintenance if nothing else.  I'll do the
fronts myself (ordered parts from Mazda competition - $116 per hub)
and taking it to a shop for the rears.  I got a couple of quotes for
$400-450 P+L for the rears.

--Ian
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to