One of the guys I AutoX with was saying that basically with how hard 
they are pushed under racing conditions that they never get a chance to 
make any noise and instead just fail.  He even had this happen at one of 
the last AutoX events this year.  No noise on the 100 mile drive to the 
event and after the second or third run it failed. Ended up trailering 
the car back to his house to fix it.

Mike

John Hammer wrote:
> My Spec Miata's front bearings were replaced in the off season early 
> this year as part of regular maintenance.  When I pulled them out, 
> they literally fell apart.  It was pretty surprising since they never 
> made a sound (and I've had a bearing go bad, so I know what to listen 
> for).  As for the replace procedure; it's relatively simple; do a 
> brake job, then remove the big nut (heat is often required!) then 
> remove/replace & put back together.  Torque'm good!
>
> John Hammer
>
> Creative Director
> SaySomethingImportant.com
>
> Occasional Racecar Driver
>
>     -------- Original Message --------
>     Subject: Re: replacing wheel bearings
>     From: David Brown <[EMAIL PROTECTED]>
>     Date: Thu, October 23, 2008 1:50 pm
>     To: [email protected]
>
>     At this summer's Longest Day at Nelson Ledges, our car had a wheel
>     bearing noise that came and went during testing and qualifying, but
>     never showed up in any of the conventional tests. We went so far as
>     changing the entire rear end and all brakes, wheels and tires and it
>     persisted. An hour and a half into the race, the left front
>     bearing let
>     go sending the car into a multi-revolution spin. It was slopping
>     around
>     so badly that the car had no brakes at the end of a straight section.
>     Fortunately, the driver did an excellent job and we had a parts
>     car in
>     the pits.
>
>     Later on, I was talking with a well known endurance racer (actually
>     borrowing a Cool Shirt cooler to replace ours [dead pump : ( ]).
>     During our walk to his donor car, he told me he ran Miatas back in
>     the
>     old Firehawk series days and learned early on to never track Miata
>     wheel bearings for more than 12 hours without replacement. Food for
>     thought.
>
>     Our experience taught us that it doesn't necessarily have to test
>     like
>     a bad bearing to give the vibration and noise on the road/track.
>     Obviously, in a SM car on track, there is less chance to hear bearing
>     noise. YRMV
>
>     El Brown-O-
>
>
>     On Thursday, October 23, 2008, at 10:21 AM, [EMAIL PROTECTED]
>     wrote:
>
>     > I believe so on the fronts, but not sure.. haven't replaced them yet.
>     >
>     > That didn't work on my car.. I jerked it in all directions loaded
>     and
>     > unloaded, *no* slop.. but it made noise spinning it. I jacked the
>     car
>     > up and idled it in 5th and it was a constant rrrrrrrrrrrrrrrrr noise
>     > emanating from the wheel area. Spinning the hub without brake
>     hardware
>     > you could feel notchy-ness and hear the bearings. Even disassembly
>     > didn't indicate badness, but it was bad.
>     >
>     > I've heard that too, but I don't subscribe.. it's no easier or
>     cheaper
>     > to do it at the same time, the only thing you save is potential down
>     > time (do it all one day vs two half days). The argument goes that if
>     > the left wore out, the right isn't far behind.. but that's not
>     always
>     > true. Something things I do agree (springs, shocks, tires, socks)
>     but
>     > not for bearings. IMNSHO.
>     >
>     > Wally
>     >
>     >
>     <image.tiff>Ross Kuhns <[EMAIL PROTECTED]>
>     >
>     >
>     <image.tiff>
>     >
>     >
>     > or for the fronts you can just replace the whole hub correct?
>     >
>     > To test you don't need to jack it up, we always give a good hard
>     pull
>     > in a couple axis' at autox safety tests and you can tell a bad one -
>     > compare yours to another miata or two.
>     >
>     >
>     > *on a side note, I saw where one of the track guys, oh it was
>     Emilio,
>     > recommended always replacing the hubs in pairs, i.e. "if you do one
>     > side, do the other as well". Any idea why? I replaced one of my
>     fronts
>     > last year, but not the other.
>     >
>     >
>     >
>     > Ross Kuhns
>     <image.tiff>
>     >
>     >
>     > Subject: Re: replacing wheel bearings
>     > To: [EMAIL PROTECTED]
>     > From: [EMAIL PROTECTED]
>     > Date: Thu, 23 Oct 2008 08:52:29 -0400
>     > CC: [EMAIL PROTECTED]; [EMAIL PROTECTED];
>     > [email protected]
>     >
>     >
>     > I just did a left rear, rumble with the top up, shake test had zero
>     > slop in any axis.. was bad, tho. Replaced and noise went away, car
>     > also tended to track lane crowns worse as the wheel would toe in/out
>     > as it interacted with the crown. That has lessened with the new
>     > bearing.
>     >
>     > You either need a press or a gear puller. I found this writeup very
>     > helpful (and I had to use my oxy/acet torch to get the bearing
>     race to
>     > move).
>     >
>     > http://forum.miata.net/vb/showpost.php?p=1361125&postcount=14
>     <http://forum.miata.net/vb/showpost.php?p=1361125&postcount=14>
>     > http://forum.miata.net/vb/showpost.php?p=1361129&postcount=15
>     <http://forum.miata.net/vb/showpost.php?p=1361129&postcount=15>
>     >
>     > There was a secondary writeup that had pictures that helped a ton..
>     > This is how I did it, and it worked fine (with the torch, race
>     > wouldn't move without it)
>     >
>     > http://my.att.net/p/s/community.dll?ep=87&subpageid=222341&ck=
>     <http://my.att.net/p/s/community.dll?ep=87&subpageid=222341&ck=>
>     >
>     > You may also need the snap ring.
>     >
>     > Longer studs, I believe corvette ones work, but I don't rememebr
>     more
>     > specifics.
>     >
>     > Wallyman
>     >
>     >
>     <image.tiff>Ashraf Farrag <[EMAIL PROTECTED]>
>     >
>     <image.tiff>
>     >
>     >
>     >
>     > > So now I'm suspecting the wheel bearings. Since the car is 10 years
>     > > old and has 80K miles, 50+ track days, and 20+ autocrosses on
>     it, I'm
>     > > thinking maybe it's time to just do all of them.
>     > >
>     > Wheel bearings make a "rumbling" noise as it has been
>     > described/characterized to me.
>     >
>     > Shake/wobble test? Lift car, grab wheel at top and bottom and try to
>     > wiggle and feel for play in the bearing. If there is play, you'll
>     feel
>     > it and it will sort of "click" but you should also make sure it
>     isn't a
>     > worn suspension joint. The FSM outlines a more precise test
>     involving a
>     > dial indicator gauge. Kind of expensive to replace all four if not
>     > needed, IMHO but not a bad idea if the car is a track car. If you
>     even
>     > suspect wheel bearings, you should not be driving it.
>     >
>     > Half-shafts and driveaxle checked?
>     >
>     > --Ashraf
>     > _______________________________________________
>     > Miatapower mailing list
>     > [email protected]
>     > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
>     >
>     > <graycol.gif><pic00474.gif><ecblank.gif><C7504910.gif><C7595738.gif><C6
>
>     > 196514.gif><C5509330.gif><C3722995.gif><C2850767.gif><C2752546.gif><C52
>
>     > 09476.gif><C5279569.gif>_______________________________________________
>     > Miatapower mailing list
>     > [email protected]
>     > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
>     ------------------------------------------------------------------------
>     _______________________________________________
>     Miatapower mailing list
>     [email protected]
>     http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Miatapower mailing list
> [email protected]
> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
>   
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to