I think it depends. I had a very tough time getting the races off of the
spindles on mine. I had to grind them down then knock them off with a
hammer. Of course my bearings had came apart when I pulled it all loose so
I'm sure that didnt help me.

pat

On Mon, Oct 27, 2008 at 10:08 AM, John Hammer <[EMAIL PROTECTED]>wrote:

> I've done rears; they're a pain in the butt, but not THAT tough to do.
> Yes, you need a press to do the job, but Larry's 1.3 hours per side sounds
> right.
>
> John Hammer
>
> Creative Director
> SaySomethingImportant.com
>
> Occasional Racecar Driver
>
>  -------- Original Message --------
> Subject: RE: replacing wheel bearings
> From: "Larry Alster" <[EMAIL PROTECTED]>
> Date: Thu, October 23, 2008 7:24 pm
> To: <[EMAIL PROTECTED]>, "'Michael Knudson'" <[EMAIL PROTECTED]>
> Cc: [email protected]
>
> Might be just me but that price for the rear bearings sounds a little
> steep.
> My labor book says 1.3 hours per side. Online sells the bearings for 31
> each.
>
>
>
> Larry
>
> White Knight      1991 Crystal White   #99 CSP
> Silver Bullet        1992 Silverstone     #17 SM2  FM I+ Turbo
> Honey B             1992 Sunburst Yellow #99 SM2L  JR Supercharger
> Whooosh           2004 Titanium Mazdaspeed MX-5
>
> LowCountry Miata  http://www.lowcountrymiataclub.net
> Masters Miata
> RAGS 074
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]<http://email.secureserver.net/pcompose.php#Compose>]
> On Behalf Of Ian McCloghrie
> Sent: Thursday, October 23, 2008 7:17 PM
> To: Michael Knudson
> Cc: [email protected]
> Subject: Re: replacing wheel bearings
>
> On Oct 23, 2008 Michael Knudson wrote:
> > One of the guys I AutoX with was saying that basically with how hard
> > they are pushed under racing conditions that they never get a chance to
> > make any noise and instead just fail. He even had this happen at one of
> > the last AutoX events this year. No noise on the 100 mile drive to the
> > event and after the second or third run it failed. Ended up trailering
> > the car back to his house to fix it.
>
> Yikes. Given what I've read, I think I've decided that it's time to
> do all four as preventative maintenance if nothing else. I'll do the
> fronts myself (ordered parts from Mazda competition - $116 per hub)
> and taking it to a shop for the rears. I got a couple of quotes for
> $400-450 P+L for the rears.
>
> --Ian
> _______________________________________________
> Miatapower mailing list
> [email protected]
> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
>
> _______________________________________________
> Miatapower mailing list
> [email protected]
> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
>
>
> _______________________________________________
> Miatapower mailing list
> [email protected]
> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
>
>
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to