I'll do another check for broken wires and good earths etc. I was
working on the car whilst the battery was charging up. It had an
aftermarket remote central locking kit fitted that was not working
(power locking via key was still working). I traced the fault to a bad
ground under the dash. The only connection other that power and earth
was a connection to the purple wire input to the OEM power door lock
module.  I have since completely removed the aftermarket kit just in
case but it has made no difference.

 

I also removed an aftermarket header and exhaust and replaced it with
the standard and had to disconnect the air box etc. to get access. I've
gone over these connections 2 or 3 times to see if they are all good.

 

I'll check the cams are turning tonight.

 

Thanks,

Rich

 

 

From: Bill Cardell [mailto:[email protected]] 
Sent: 10 March 2011 15:30
To: Bell, Richard (GE Energy Services); Ken Bogart;
[email protected]
Subject: RE: Non-starting 2001 help needed

 

broken wires, loose connectors, non rotating cams? And recent
"improvements"? Always look where you last worked.

 

________________________________

From: Bell, Richard (GE Energy Services) [mailto:[email protected]]
Sent: Thu 3/10/2011 8:09 AM
To: Bill Cardell; Ken Bogart; [email protected]
Subject: RE: Non-starting 2001 help needed

Apart from cam sensor, crank sensor and immobilizer are there any other
components feeding info to the ECU that might prevent it from firing the
injectors?

 

The first two look relatively easy to check, I've no idea how I would
troubleshoot an immobilizer issue?

 

Thanks,

Rich

 

From: Bill Cardell [mailto:[email protected]] 
Sent: 10 March 2011 14:50
To: Bell, Richard (GE Energy Services); Ken Bogart;
[email protected]
Subject: RE: Non-starting 2001 help needed

 

You're not necessarily cutting *power* to the injectors-they are turned
on/off by switched ground from the ecu.

 

________________________________

From: [email protected] on behalf of Bell, Richard (GE
Energy Services)
Sent: Thu 3/10/2011 4:55 AM
To: Ken Bogart; [email protected]
Subject: RE: Non-starting 2001 help needed

Battery charged up to 12.6V and cranked well so think that is OK. I will
check for cam belt today.

 

I'm just wondering what could cut power to the fuel injectors but still
allow the fuel pump to run?

 

Thanks,

Rich

 

From: [email protected] [mailto:[email protected]] On Behalf Of Ken
Bogart
Sent: 10 March 2011 11:43
To: Bell, Richard (GE Energy Services)
Cc: [email protected]
Subject: Re: Non-starting 2001 help needed

 

Could be weak battery... but sounds like a classic broken timing belt.
Can you see the cam turning through the oil fill hole?

 

Probably not, but simple to check for. 


Ken Bogart
-----------------------------------------------------
96 Montego Blue FFS Coldside (His)
97 Black & Tan (Hers)
90 Crystal White (sons)
------------------------------------------------------
http://www.miatacare.com <http://www.miatacare.com/> 
http://www.cincimiata.com <http://www.cincimiata.com/> 
http://www.bcchallenger.org <http://www.bcchallenger.org/> 
MiataMail.com list owner 

On Thu, Mar 10, 2011 at 4:23 AM, Bell, Richard (GE Energy Services)
<[email protected]> wrote:

Hi Folks,

I wonder if anyone can shed some light on my issue as I'm getting
nowhere at the moment. Car is a late 2001 and was running fine before
sitting for a week. Battery wasn't great and went flat, however, I
managed to get it back to full charge. Car cranks fine but refuses to
fire. After cranking, I pulled a plug and it was completely dry and
there is no spark when cranking with the plug against the cam cover.
However, I do hear the fuel pump run for about 0.5 seconds after I stop
cranking. I have no CEL and no fault codes logged. There is no key
warning light on to suggest immobiliser issue.

Can anyone suggest any possible causes? I'm going to borrow a crank and
cam sensor to see if they are causing issues as I read sometimes they
don't cause fault codes. But other than that, what else can I check? Can
someone point me in the right direction of some wiring diagrams for a
2001?

Thanks in advance,
Rich
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

 

_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to