Robert,
Where can you set flow control on a 951? Don't see it in the GUI
I did an export verbose on /interface Ethernet and still don't see it
set [ find default-name=ether1 ] arp=enabled auto-negotiation=yes
bandwidth=unlimited/unlimited disabled=no full-duplex=yes l2mtu=1598
mac-address=D4:CA:6D:DD:37:1C master-port=none mtu=1500 name=ether1
orig-mac-address=D4:CA:6D:DD:37:1C poe-out=\
auto-on poe-priority=10 speed=100Mbps
Paul
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Robert Andrews
Sent: Wednesday, July 09, 2014 12:03 PM
To: Mikrotik discussions
Subject: Re: [Mikrotik] Throughput Problem on Mikrotik RB951
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Have you set up another Mikrotik outside on your network and used the MT
bandwidth tests from the 951 to it? ( be sure and test using tcp
)... Also be sure and set the Ethernet ports to auto for tx and rx
flow control...
Robert
On 07/09/2014 08:47 AM, Justin Marshall wrote:
> Hi,
>
> Having an issue with a few customers behind RB951 Mikrotiks. All of
> these customers are on bridged Canopy 100's. Running a test from the
> Mikrotik (tools/bandwidth test) to a Mikrotik we have setup at our
> office I'm seeing 8-10.2Mbps down. However when the customer runs a
> speedtest (regardless of which speedtest server) they usually max out
> around 3Mbps down.
>
> One customer in particular was really helpful on trying to narrow down
> what could be causing this. He tried 3 different computers (both
> wired and wireless), 2 different cables between the computers and the
> RB951, and different ports on the RB951. He also gave me teamviewer
> access to one of these (wired to the RB951) to try a few different
> things.
>
> So far I tried: Upgraded to 6.15 firmware, did the /system routerboard
> upgrade. I've removed all traffic shaping rules that could possibly
> be effecting their speed. Tried using a src-nat rule in lieu of
> masquerade. Also tried 2 different browsers to make sure it wasn't
> just a browser issue on the computer I had teamviewer access to.
>
> Has anyone else experienced this, or have any other suggestions to
> try?
>
> Thanks [email protected]<mailto:[email protected]>
>
>
>
>
> -------------- next part -------------- An HTML attachment was
> scrubbed... URL:
> <http://mail.butchevans.com/pipermail/mikrotik/attachments/20140709/c1
> 5e7bc2/attachment.html>
>
>
_______________________________________________
> Mikrotik mailing list [email protected]
> http://mail.butchevans.com/mailman/listinfo/mikrotik
>
> Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
> RouterOS
>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
iQEcBAEBAgAGBQJTvWfDAAoJEC+8HUjSuDOs9VcH/07A9aXY3ioPlATIbmLWRPM/
x/H+VXUK4nkn76ZKu9SEDdnLrQIgGI0GFFuobiQ6Lh3K9+DFcN/RINwB/SoYnkmO
AwEv1YziToXAWZXUxAQSAvsxAHo9t8+rONNFzsDPkzRc7yDDZsqsIdzpERw8F4+p
ZxNWyRJ2FKGe/VzGarVs6ldSBlk4ew/AIELwWenUdskqg/akFLvOQHG28GP8rKIA
lqExvcEV2v17qmq6ZeTygk8kYgEVMmmTYjJr6Mb/GA7oWLiGR2Tdims3tLTMVJ0b
hR1N1xgKyMPuZOqGisZFM4XEoEkTFNA0THPklDbuMVpxnlYGv9CiahtvLr3oSNk=
=a1kT
-----END PGP SIGNATURE-----
_______________________________________________
Mikrotik mailing list
[email protected]
http://mail.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
_______________________________________________
Mikrotik mailing list
[email protected]
http://mail.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
