On Wed, Jul 09, 2014 at 10:55:22AM -0700, Robert Andrews wrote:
> Under the other MT's I have it's under interface ether[x] Ethernet
> That's under winbox
>
>
> On 07/09/2014 09:28 AM, Paul McCall wrote:
> > Robert,
> >
> > Where can you set flow control on a 951? Don't see it in the GUI
> >
> > I did an export verbose on /interface Ethernet and still don't see it
> >
> > set [ find default-name=ether1 ] arp=enabled auto-negotiation=yes
> > bandwidth=unlimited/unlimited disabled=no full-duplex=yes l2mtu=1598
> > mac-address=D4:CA:6D:DD:37:1C master-port=none mtu=1500 name=ether1
> > orig-mac-address=D4:CA:6D:DD:37:1C poe-out=\
> > auto-on poe-priority=10 speed=100Mbps
Which 951 do you have? The 951-2n?
I have the 951Ui-2HnD that MikroTik was giving away at MUM in St. Louis.
951Ui-2HnD> /int ethernet export verbose
/interface ethernet
set [ find default-name=ether1 ] advertise=\
10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full arp=enabled \
auto-negotiation=yes bandwidth=unlimited/unlimited comment="lambert - GVH"
disabled=\
no full-duplex=yes l2mtu=2028 mac-address=D4:CA:6D:xx:xx:xx
master-port=none mtu=\
1500 name=ether1 orig-mac-address=D4:CA:6D:xx:xx:xx poe-out=auto-on
poe-priority=10 \
rx-flow-control=off speed=100Mbps tx-flow-control=off
951Ui-2HnD] > /system routerboard print
routerboard: yes
model: 951Ui-2HnD
serial-number:
current-firmware: 3.14
upgrade-firmware: 3.14
951Ui-2HnD] > /system package print
Flags: X - disabled
# NAME VERSION SCHEDULED
0 routeros-mipsbe 6.14
1 system 6.14
2 wireless-fp 6.14
3 X ipv6 6.14
4 X wireless 6.14
5 hotspot 6.14
6 dhcp 6.14
7 mpls 6.14
8 routing 6.14
9 ppp 6.14
10 security 6.14
11 advanced-tools 6.14
--
Scott Lambert KC5MLE Unix SysAdmin
[email protected]
_______________________________________________
Mikrotik mailing list
[email protected]
http://mail.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
