Only-hardware should be OK.
You might try ethernet-default and see if there is a difference.
On 7/9/2014 3:59 PM, Paul McCall wrote:
Scott,
OK, These routers were on 6.7 which didn't have the options for flow control.
We upgraded to 6.15 and now they do!
So, will try setting to flow control and see if it makes a difference.
Is the interface queue being set to "only-hardware-queue" OK or is there
something more optimal for speed
Paul
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Scott Reed
Sent: Wednesday, July 09, 2014 3:27 PM
To: Mikrotik discussions
Subject: Re: [Mikrotik] Throughput Problem on Mikrotik RB951
Set 0 auto-negotiate=off speed=10Mbps duplex=full.
A couple of check boxes if you double click the Interface.
On 7/9/2014 2:13 PM, Scott Lambert wrote:
On Wed, Jul 09, 2014 at 10:55:22AM -0700, Robert Andrews wrote:
Under the other MT's I have it's under interface ether[x] Ethernet
That's under winbox
On 07/09/2014 09:28 AM, Paul McCall wrote:
Robert,
Where can you set flow control on a 951? Don't see it in the GUI
I did an export verbose on /interface Ethernet and still don't see
it
set [ find default-name=ether1 ] arp=enabled auto-negotiation=yes
bandwidth=unlimited/unlimited disabled=no full-duplex=yes l2mtu=1598
mac-address=D4:CA:6D:DD:37:1C master-port=none mtu=1500 name=ether1
orig-mac-address=D4:CA:6D:DD:37:1C poe-out=\
auto-on poe-priority=10 speed=100Mbps
Which 951 do you have? The 951-2n?
I have the 951Ui-2HnD that MikroTik was giving away at MUM in St. Louis.
951Ui-2HnD> /int ethernet export verbose
/interface ethernet
set [ find default-name=ether1 ] advertise=\
10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full arp=enabled \
auto-negotiation=yes bandwidth=unlimited/unlimited comment="lambert -
GVH" disabled=\
no full-duplex=yes l2mtu=2028 mac-address=D4:CA:6D:xx:xx:xx
master-port=none mtu=\
1500 name=ether1 orig-mac-address=D4:CA:6D:xx:xx:xx poe-out=auto-on
poe-priority=10 \
rx-flow-control=off speed=100Mbps tx-flow-control=off
951Ui-2HnD] > /system routerboard print
routerboard: yes
model: 951Ui-2HnD
serial-number:
current-firmware: 3.14
upgrade-firmware: 3.14
951Ui-2HnD] > /system package print
Flags: X - disabled
# NAME VERSION SCHEDULED
0 routeros-mipsbe 6.14
1 system 6.14
2 wireless-fp 6.14
3 X ipv6 6.14
4 X wireless 6.14
5 hotspot 6.14
6 dhcp 6.14
7 mpls 6.14
8 routing 6.14
9 ppp 6.14
10 security 6.14
11 advanced-tools 6.14
--
Scott Reed
Owner
NewWays Networking, LLC
Wireless Networking
Network Design, Installation and Administration Mikrotik Advanced Certified
www.nwwnet.net
(765) 855-1060 (765) 439-4253 Toll-free (855) 231-6239
_______________________________________________
Mikrotik mailing list
[email protected]
http://mail.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
_______________________________________________
Mikrotik mailing list
[email protected]
http://mail.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4716 / Virus Database: 3986/7823 - Release Date: 07/09/14
--
Scott Reed
Owner
NewWays Networking, LLC
Wireless Networking
Network Design, Installation and Administration
Mikrotik Advanced Certified
www.nwwnet.net
(765) 855-1060 (765) 439-4253 Toll-free (855) 231-6239
_______________________________________________
Mikrotik mailing list
[email protected]
http://mail.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
