On Wed, Jul 09, 2014 at 07:59:19PM +0000, Paul McCall wrote: > Scott, > > OK, These routers were on 6.7 which didn't have the options for flow > control. We upgraded to 6.15 and now they do! > > So, will try setting to flow control and see if it makes a difference. > > Is the interface queue being set to "only-hardware-queue" OK or is > there something more optimal for speed
only-hardware-queue should provide the absolute best performance. Everything else is done in the CPU. > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Scott Reed > Sent: Wednesday, July 09, 2014 3:27 PM > To: Mikrotik discussions > Subject: Re: [Mikrotik] Throughput Problem on Mikrotik RB951 > > Set 0 auto-negotiate=off speed=10Mbps duplex=full. > > A couple of check boxes if you double click the Interface. > > On 7/9/2014 2:13 PM, Scott Lambert wrote: > > On Wed, Jul 09, 2014 at 10:55:22AM -0700, Robert Andrews wrote: > >> Under the other MT's I have it's under interface ether[x] Ethernet > >> That's under winbox > >> > >> > >> On 07/09/2014 09:28 AM, Paul McCall wrote: > >>> Robert, > >>> > >>> Where can you set flow control on a 951? Don't see it in the GUI > >>> > >>> I did an export verbose on /interface Ethernet and still don't see > >>> it > >>> > >>> set [ find default-name=ether1 ] arp=enabled auto-negotiation=yes > >>> bandwidth=unlimited/unlimited disabled=no full-duplex=yes l2mtu=1598 > >>> mac-address=D4:CA:6D:DD:37:1C master-port=none mtu=1500 name=ether1 > >>> orig-mac-address=D4:CA:6D:DD:37:1C poe-out=\ > >>> auto-on poe-priority=10 speed=100Mbps > > Which 951 do you have? The 951-2n? > > > > I have the 951Ui-2HnD that MikroTik was giving away at MUM in St. Louis. > > > > 951Ui-2HnD> /int ethernet export verbose > > /interface ethernet > > set [ find default-name=ether1 ] advertise=\ > > 10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full > > arp=enabled \ > > auto-negotiation=yes bandwidth=unlimited/unlimited comment="lambert - > > GVH" disabled=\ > > no full-duplex=yes l2mtu=2028 mac-address=D4:CA:6D:xx:xx:xx > > master-port=none mtu=\ > > 1500 name=ether1 orig-mac-address=D4:CA:6D:xx:xx:xx poe-out=auto-on > > poe-priority=10 \ > > rx-flow-control=off speed=100Mbps tx-flow-control=off > > > > 951Ui-2HnD] > /system routerboard print > > routerboard: yes > > model: 951Ui-2HnD > > serial-number: > > current-firmware: 3.14 > > upgrade-firmware: 3.14 > > > > 951Ui-2HnD] > /system package print > > Flags: X - disabled > > # NAME VERSION > > SCHEDULED > > 0 routeros-mipsbe 6.14 > > 1 system 6.14 > > 2 wireless-fp 6.14 > > 3 X ipv6 6.14 > > 4 X wireless 6.14 > > 5 hotspot 6.14 > > 6 dhcp 6.14 > > 7 mpls 6.14 > > 8 routing 6.14 > > 9 ppp 6.14 > > 10 security 6.14 > > 11 advanced-tools 6.14 > > > > -- > Scott Reed > Owner > NewWays Networking, LLC > Wireless Networking > Network Design, Installation and Administration Mikrotik Advanced Certified > www.nwwnet.net > (765) 855-1060 (765) 439-4253 Toll-free (855) 231-6239 > > > _______________________________________________ > Mikrotik mailing list > [email protected] > http://mail.butchevans.com/mailman/listinfo/mikrotik > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS > _______________________________________________ > Mikrotik mailing list > [email protected] > http://mail.butchevans.com/mailman/listinfo/mikrotik > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS -- Scott Lambert KC5MLE Unix SysAdmin [email protected] How to be a "computer expert," http://www.xkcd.com/627/ _______________________________________________ Mikrotik mailing list [email protected] http://mail.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
