Scott, OK, These routers were on 6.7 which didn't have the options for flow control. We upgraded to 6.15 and now they do!
So, will try setting to flow control and see if it makes a difference. Is the interface queue being set to "only-hardware-queue" OK or is there something more optimal for speed Paul -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Scott Reed Sent: Wednesday, July 09, 2014 3:27 PM To: Mikrotik discussions Subject: Re: [Mikrotik] Throughput Problem on Mikrotik RB951 Set 0 auto-negotiate=off speed=10Mbps duplex=full. A couple of check boxes if you double click the Interface. On 7/9/2014 2:13 PM, Scott Lambert wrote: > On Wed, Jul 09, 2014 at 10:55:22AM -0700, Robert Andrews wrote: >> Under the other MT's I have it's under interface ether[x] Ethernet >> That's under winbox >> >> >> On 07/09/2014 09:28 AM, Paul McCall wrote: >>> Robert, >>> >>> Where can you set flow control on a 951? Don't see it in the GUI >>> >>> I did an export verbose on /interface Ethernet and still don't see >>> it >>> >>> set [ find default-name=ether1 ] arp=enabled auto-negotiation=yes >>> bandwidth=unlimited/unlimited disabled=no full-duplex=yes l2mtu=1598 >>> mac-address=D4:CA:6D:DD:37:1C master-port=none mtu=1500 name=ether1 >>> orig-mac-address=D4:CA:6D:DD:37:1C poe-out=\ >>> auto-on poe-priority=10 speed=100Mbps > Which 951 do you have? The 951-2n? > > I have the 951Ui-2HnD that MikroTik was giving away at MUM in St. Louis. > > 951Ui-2HnD> /int ethernet export verbose > /interface ethernet > set [ find default-name=ether1 ] advertise=\ > 10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full arp=enabled \ > auto-negotiation=yes bandwidth=unlimited/unlimited comment="lambert - > GVH" disabled=\ > no full-duplex=yes l2mtu=2028 mac-address=D4:CA:6D:xx:xx:xx > master-port=none mtu=\ > 1500 name=ether1 orig-mac-address=D4:CA:6D:xx:xx:xx poe-out=auto-on > poe-priority=10 \ > rx-flow-control=off speed=100Mbps tx-flow-control=off > > 951Ui-2HnD] > /system routerboard print > routerboard: yes > model: 951Ui-2HnD > serial-number: > current-firmware: 3.14 > upgrade-firmware: 3.14 > > 951Ui-2HnD] > /system package print > Flags: X - disabled > # NAME VERSION SCHEDULED > 0 routeros-mipsbe 6.14 > 1 system 6.14 > 2 wireless-fp 6.14 > 3 X ipv6 6.14 > 4 X wireless 6.14 > 5 hotspot 6.14 > 6 dhcp 6.14 > 7 mpls 6.14 > 8 routing 6.14 > 9 ppp 6.14 > 10 security 6.14 > 11 advanced-tools 6.14 > -- Scott Reed Owner NewWays Networking, LLC Wireless Networking Network Design, Installation and Administration Mikrotik Advanced Certified www.nwwnet.net (765) 855-1060 (765) 439-4253 Toll-free (855) 231-6239 _______________________________________________ Mikrotik mailing list [email protected] http://mail.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS _______________________________________________ Mikrotik mailing list [email protected] http://mail.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
