On Fri, Jun 01, 2012 at 01:04:54PM -0400, Scott McEachern wrote: > Hello everyone, > > I'm hoping that I'm missing something simple (like usual) and maybe > someone could straighten me out. > > I'm trying to add a pair of 3TB drives to my workstation, which I > plan on turning into a ~3TB RAID 1 array, and seem to be having > difficulty realizing the full size of the drives. > > The hardware is about a year old, and less than two years old > according to the BIOS date: > > bios0: vendor American Megatrends Inc. version "2103" date 06/18/2010 > bios0: ASUSTeK Computer INC. M4A785TD-V EVO > > (Correction, I've since updated the BIOS to the latest version, just > in case, and it reads like so: > > bios0: vendor American Megatrends Inc. version "2105" date 07/23/2010 > > and it makes no difference.) > > (The full dmesg is below, but for now I'll just post the relevant bits.) > > The BIOS happily reports the two drives as present and of 3.0TB > capacity. OpenBSD seems to recognize this as well: > > sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD5000AAKS-0, 05.0> SCSI3 > 0/direct fixed naa.50014ee001cbd923 > sd0: 476940MB, 512 bytes/sector, 976773168 sectors > sd1 at scsibus0 targ 1 lun 0: <ATA, ST3000DM001-9YN1, CC4B> SCSI3 > 0/direct fixed naa.5000c5004a6e56f1 > sd1: 2861588MB, 512 bytes/sector, 5860533168 sectors > sd2 at scsibus0 targ 2 lun 0: <ATA, ST3000DM001-9YN1, CC4B> SCSI3 > 0/direct fixed naa.5000c5004a5baa2e > sd2: 2861588MB, 512 bytes/sector, 5860533168 sectors > > (Note that sd0 is my boot/OS drive, and works just fine. The two > 3TB drives, sd1 and sd2, will eventually just be used for storage.) > > Those numbers look correct, like the OS is properly recognizing the > capacity. I have a 1.5TB drive in another machine (a six year-old > Pentium 4 no less!) that works fine and looks like this: > > wd0: 16-sector PIO, LBA48, 1430799MB, 2930277168 sectors > > (Although I should mention that that drive has a couple of <1TB > partitions, so there are no FFS/FFS2 issues.) > > I just wanted to get on with my day and not have any fuss, so I > issued an "fdisk -iy sd1" command on the way to disklabel'ing > things. I suspect that's my error, because fdisk says this: (I've > added some commas to make for easier reading.) > > # fdisk sd1 > Disk: sd1 geometry: 364801/255/63 [1,565,565,872 Sectors] > Offset: 0 Signature: 0xAA55 > Starting Ending LBA Info: > #: id C H S - C H S [ start: size ] > ------------------------------------------------------------------------------- > 0: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused > 1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused > 2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused > *3: A6 0 1 2 - 97451 165 59 [ 64: 1,565,560,705 > ] OpenBSD > > Uhm, that doesn't seem right, considering the fdisk output for a > 1.5TB drive looks like this: > > # fdisk wd0 > Disk: wd0 geometry: 182401/255/63 [2,930,277,168 Sectors] > Offset: 0 Signature: 0xAA55 > Starting Ending LBA Info: > #: id C H S - C H S [ start: size ] > ------------------------------------------------------------------------------- > 0: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused > 1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused > 2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused > *3: A6 0 1 2 - 182400 254 63 [ 64: 2,930,272,001 > ] OpenBSD > > A drive with half the capacity seems to have double the numbers, but > not for geometry. I suspect that fdisk is lying to me, but I could > be wrong. > > Let's see what disklabel(8) has to say. On the 1.5TB drive, it > looks mostly like this (I've snipped some irrelevant partition data > and added commas to make big numbers easier to read): > > # disklabel wd0 > # /dev/rwd0c: > type: ESDI > disk: ESDI/IDE disk > label: ST31500341AS > duid: dded65e423b05de7 > flags: > bytes/sector: 512 > sectors/track: 63 > tracks/cylinder: 255 > sectors/cylinder: 16065 > cylinders: 182401 > total sectors: 2,930,277,168 > boundstart: 64 > boundend: 2930272065 > drivedata: 0 > > 16 partitions: (snipped) > # size offset fstype [fsize bsize cpg] > c: 2,930,277,168 0 unused > > On the new 3TB drive, it looks like this: > > # disklabel sd1 > # /dev/rsd1c: > type: SCSI > disk: SCSI disk > label: ST3000DM001-9YN1 > duid: 0000000000000000 > flags: > bytes/sector: 512 > sectors/track: 63 > tracks/cylinder: 255 > sectors/cylinder: 16065 > cylinders: 364801 > total sectors: 5,860,533,168 > boundstart: 64 > boundend: 1565560769 > drivedata: 0 > > 16 partitions: > # size offset fstype [fsize bsize cpg] > c: 5,860,533,168 0 unused > > Wait a minute here... disklabel seems to have correct data (ignoring > the duid). I'll bet I'm failing at grade four math, but that looks > roughly like a 3TB drive. > > So while I'm wondering about going back to grade school, I try > creating one big partition on the new 3TB drive, and it goes like > this: > > # disklabel -E sd1 > Label editor (enter '?' for help at any prompt) > > p g > OpenBSD area: 64-1565560769; size: 746.5G; free: 746.5G > # size offset fstype [fsize bsize cpg] > c: 2794.5G 0 unused
Do a 'b *' command here, see the man page. That will make the whole disk available and the a command will do what you expect. -Otto > > a a > offset: [64] > size: [1565560705] > FS type: [4.2BSD] > Rounding size to bsize (128 sectors): 1565560640 > > p g > OpenBSD area: 64-1565560769; size: 746.5G; free: 0.0G > # size offset fstype [fsize bsize cpg] > a: 746.5G 64 4.2BSD 8192 65536 1 > c: 2794.5G 0 unused > > Oh. Hmm. That doesn't seem to make much sense. Disklabel is not > letting me create anything larger than ~750GB on what it seems to > realize is a ~2.8GB drive. > > That's especially weird, considering I have a 950GB partition on the > 1.5TB drive. > > At this point I'm wondering WTF is going on. Is this an > OpenBSD-specific problem? A BIOS issue? So I unplug all drives > except one of the 3TB's, install FreeBSD and tell it to use the > whole drive. I get the exact same results from their disklabel. > Must be the hardware, right? > > Wrong. Just for laughs I installed Debian Linux, and after a couple > of hours I end up with a usable system. Not my cup of tea, but hey, > I just want answers at this point. To my dismay I ended up with > 2.7TB of usable space. I called it a day and went to bed. > > So, with a sense of humour, I come before you today and ask if > anyone can point out the error of my ways. Surely I'm missing > something simple but important. Obviously I'd really like to use > all available space, but I'm at a loss. > > PS: I forgot to mention, I also tried installing OpenBSD straight > from the 5.1 DVD figuring the installer might know something I > don't. Nope, same thing. > > Thanks for reading this far. > > > Full dmesg: > > OpenBSD 5.1-current (GENERIC.MP) #296: Sun May 20 10:41:35 MDT 2012 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 12613910528 (12029MB) > avail mem = 12255776768 (11688MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x9f000 (68 entries) > bios0: vendor American Megatrends Inc. version "2103" date 06/18/2010 > bios0: ASUSTeK Computer INC. M4A785TD-V EVO > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S1 S3 S4 S5 > acpi0: tables DSDT FACP APIC MCFG OEMB SRAT HPET SSDT > acpi0: wakeup devices PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4) > PCE7(S4) PCE9(S4) PCEA(S4) PCEB(S4) PCEC(S4) SBAZ(S4) PS2M(S4) > PS2K(S4) UAR1(S4) P0PC(S4) UHC1(S4) UHC2(S4) UHC3(S4) USB4(S4) > UHC5(S4) UHC6(S4) UHC7(S4) > acpitimer0 at acpi0: 3579545 Hz, 32 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: AMD Phenom(tm) II X6 1100T Processor, 3315.24 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, > 512KB 64b/line 16-way L2 cache, 6MB 64b/line 48-way L3 cache > cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully > associative > cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully > associative > cpu0: AMD erratum 721 detected and fixed > cpu0: apic clock running at 200MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: AMD Phenom(tm) II X6 1100T Processor, 3314.79 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT > cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, > 512KB 64b/line 16-way L2 cache, 6MB 64b/line 48-way L3 cache > cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully > associative > cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully > associative > cpu1: AMD erratum 721 detected and fixed > cpu2 at mainbus0: apid 2 (application processor) > cpu2: AMD Phenom(tm) II X6 1100T Processor, 3314.79 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT > cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, > 512KB 64b/line 16-way L2 cache, 6MB 64b/line 48-way L3 cache > cpu2: ITLB 32 4KB entries fully associative, 16 4MB entries fully > associative > cpu2: DTLB 48 4KB entries fully associative, 48 4MB entries fully > associative > cpu2: AMD erratum 721 detected and fixed > cpu3 at mainbus0: apid 3 (application processor) > cpu3: AMD Phenom(tm) II X6 1100T Processor, 3314.79 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT > cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, > 512KB 64b/line 16-way L2 cache, 6MB 64b/line 48-way L3 cache > cpu3: ITLB 32 4KB entries fully associative, 16 4MB entries fully > associative > cpu3: DTLB 48 4KB entries fully associative, 48 4MB entries fully > associative > cpu3: AMD erratum 721 detected and fixed > cpu4 at mainbus0: apid 4 (application processor) > cpu4: AMD Phenom(tm) II X6 1100T Processor, 3314.79 MHz > cpu4: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT > cpu4: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, > 512KB 64b/line 16-way L2 cache, 6MB 64b/line 48-way L3 cache > cpu4: ITLB 32 4KB entries fully associative, 16 4MB entries fully > associative > cpu4: DTLB 48 4KB entries fully associative, 48 4MB entries fully > associative > cpu4: AMD erratum 721 detected and fixed > cpu5 at mainbus0: apid 5 (application processor) > cpu5: AMD Phenom(tm) II X6 1100T Processor, 3314.79 MHz > cpu5: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT > cpu5: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, > 512KB 64b/line 16-way L2 cache, 6MB 64b/line 48-way L3 cache > cpu5: ITLB 32 4KB entries fully associative, 16 4MB entries fully > associative > cpu5: DTLB 48 4KB entries fully associative, 48 4MB entries fully > associative > cpu5: AMD erratum 721 detected and fixed > ioapic0 at mainbus0: apid 6 pa 0xfec00000, version 21, 24 pins > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpihpet0 at acpi0: 14318180 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (P0P1) > acpiprt2 at acpi0: bus -1 (PCE2) > acpiprt3 at acpi0: bus -1 (PCE3) > acpiprt4 at acpi0: bus -1 (PCE4) > acpiprt5 at acpi0: bus -1 (PCE5) > acpiprt6 at acpi0: bus -1 (PCE6) > acpiprt7 at acpi0: bus -1 (PCE7) > acpiprt8 at acpi0: bus -1 (PCE9) > acpiprt9 at acpi0: bus 2 (PCEA) > acpiprt10 at acpi0: bus 3 (P0PC) > acpicpu0 at acpi0: C2, PSS > acpicpu1 at acpi0: C2, PSS > acpicpu2 at acpi0: C2, PSS > acpicpu3 at acpi0: C2, PSS > acpicpu4 at acpi0: C2, PSS > acpicpu5 at acpi0: C2, PSS > aibs0 at acpi0: RTMP RVLT RFAN GGRP GITM SITM > acpibtn0 at acpi0: PWRB > cpu0: 3315 MHz: speeds: 3300 2500 1700 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "AMD RS880 Host" rev 0x00 > ppb0 at pci0 dev 1 function 0 vendor "Asustek", unknown product > 0x9602 rev 0x00 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 5 function 0 "ATI Radeon HD 4200" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > radeondrm0 at vga1: apic 6 int 18 > drm0 at radeondrm0 > azalia0 at pci1 dev 5 function 1 "ATI Radeon HD 4200 HD Audio" rev 0x00: msi > azalia0: no supported codecs > ppb1 at pci0 dev 10 function 0 "AMD RS780 PCIE" rev 0x00: msi > pci2 at ppb1 bus 2 > re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D > (0x2800), apic 6 int 18, address 20:cf:30:b0:06:02 > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 > ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 6 > int 22, AHCI 1.1 > scsibus0 at ahci0: 32 targets > sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD5000AAKS-0, 05.0> SCSI3 > 0/direct fixed naa.50014ee001cbd923 > sd0: 476940MB, 512 bytes/sector, 976773168 sectors > sd1 at scsibus0 targ 1 lun 0: <ATA, ST3000DM001-9YN1, CC4B> SCSI3 > 0/direct fixed naa.5000c5004a6e56f1 > sd1: 2861588MB, 512 bytes/sector, 5860533168 sectors > sd2 at scsibus0 targ 2 lun 0: <ATA, ST3000DM001-9YN1, CC4B> SCSI3 > 0/direct fixed naa.5000c5004a5baa2e > sd2: 2861588MB, 512 bytes/sector, 5860533168 sectors > ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 6 int > 16, version 1.0, legacy support > ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 6 int > 16, version 1.0, legacy support > ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 6 int 17 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 6 int > 18, version 1.0, legacy support > ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 6 int > 18, version 1.0, legacy support > ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 6 int 19 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3c: SMI > iic0 at piixpm0 > iic0: addr 0x20 01=19 02=24 03=2e 04=00 05=00 06=00 07=00 08=00 > 09=00 0a=10 0b=10 0c=10 0d=10 0e=23 0f=92 10=3d 11=00 12=00 13=00 > 14=0a 15=0a 16=32 17=a0 18=e0 1a=ae 1b=a4 1c=b3 1d=00 1e=0c 1f=01 > 20=09 21=09 22=09 23=09 24=bb 3e=03 words 00=ff19 01=1924 02=242e > 03=2e00 04=0000 05=0000 06=0000 07=0000 > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 > spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 > spdmem2 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-10600 > spdmem3 at iic0 addr 0x53: 2GB DDR3 SDRAM PC3-10600 > pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, > channel 0 configured to compatibility, channel 1 configured to > compatibility > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4163B, AX13> > ATAPI 5/cdrom removable > cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 > azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: > apic 6 int 16 > azalia1: codecs: VIA/0x0397 > audio0 at azalia1 > pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00 > ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00 > pci3 at ppb2 bus 3 > "D-Link DGE-530T C1" rev 0x10 at pci3 dev 5 function 0 not configured > "VIA VT6306 FireWire" rev 0xc0 at pci3 dev 8 function 0 not configured > ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 6 int > 18, version 1.0, legacy support > pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00 > pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00 > pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00 > km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00 > pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00 > usb2 at ohci0: USB revision 1.0 > uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb3 at ohci1: USB revision 1.0 > uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb4 at ohci2: USB revision 1.0 > uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb5 at ohci3: USB revision 1.0 > uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > it0 at isa0 port 0x2e/2: IT8712F rev 8, EC port 0x290 > usb6 at ohci4: USB revision 1.0 > uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > mtrr: Pentium Pro MTRR support > uhub7 at uhub0 port 3 "HP\M^? f2105 2PORT USB 2.0 HUB" rev 2.00/7.02 addr 2 > uhidev0 at uhub5 port 1 configuration 1 interface 0 "Logitech USB > Receiver" rev 2.00/12.01 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 modifier keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub5 port 1 configuration 1 interface 1 "Logitech USB > Receiver" rev 2.00/12.01 addr 2 > uhidev1: iclass 3/1, 8 report ids > ums0 at uhidev1 reportid 2: 16 buttons, Z dir > wsmouse0 at ums0 mux 0 > uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 > uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0 > uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0 > uhidev2 at uhub5 port 1 configuration 1 interface 2 "Logitech USB > Receiver" rev 2.00/12.01 addr 2 > uhidev2: iclass 3/0, 33 report ids > uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0 > uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0 > uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0 > uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (6992ea307afaad04.a) swap on sd0b dump on sd0b > > > -- > Scott McEachern > > https://www.blackstaff.ca