On Thu, Sep 22, 2016 at 12:29 PM, Peer Janssen <p...@pjk.de> wrote:
> # cu -d -l cua00 -s 9600
> cu: open("/dev/cua00"): Device not configured
> # cu
> cu: open("/dev/cua00"): Device not configured

I have an ALIX 2d[something] and on it, the serial ports show up as com devices:

$ dmesg | egrep '^com'
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo

I notice that the com devices are missing from your dmesg output,
though.  Maybe it's not enabled in the BIOS?  I see
http://pcengines.ch/alix3d3.htm has "fix serial port" against the most
recent firmware version...

Darren Tucker (dtucker at zip.com.au)
GPG key 11EAA6FA / A86E 3E07 5B19 5880 E860  37F4 9357 ECEF 11EA A6FA (new)
    Good judgement comes with experience. Unfortunately, the experience
usually comes from bad judgement.

Reply via email to