Fred Crowson wrote:
ivorob wrote:
Hi, folks.
Within my notebook I have internal modem. How Can I force to work my
modem? Is it possible?
Best regards,
Vorobyov Ivan.
Without a dmesg its impossible to tell.
Fred
Look below:
OpenBSD 3.8 (BLUETOOTH) #0: Sun Jul 23 12:32:50 GMT 2006
[EMAIL PROTECTED]:/usr/src/kernel/sys/arch/i386/compile/BLUETOOTH
cpu0: Intel(R) Celeron(R) M processor 1.60GHz ("GenuineIntel" 686-class)
1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF
real mem = 526557184 (514216K)
avail mem = 473505792 (462408K)
using 4278 buffers containing 26431488 bytes (25812K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(aa) BIOS, date 11/06/05, BIOS32 rev. 0 @ 0xfd6d0
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 75%
apm0: AC off, battery charge high
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd6d0/0x930
pcibios0: PCI BIOS has 14 Interrupt Routing table entries
pcibios0: no compatible PCI ICU found
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xf400! 0xdc000/0x4000! 0xe0000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 915GM/PM/GMS Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 915GM/GMS Video" rev 0x03: aperture
at 0xb0080000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 915GM/GMS Video" rev 0x03 at pci0 dev 2 function 1 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03
pci1 at ppb0 bus 1
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 5
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 5
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci2 at ppb1 bus 2
bce0 at pci2 dev 5 function 0 "Broadcom BCM4401B0" rev 0x02: irq 5,
address 00:13:77:04:22:2d
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
iwi0 at pci2 dev 7 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: irq
11, address 00:13:ce:f4:e6:ff
cbb0 at pci2 dev 9 function 0 "Ricoh 5C476 CardBus" rev
0xb3pci_intr_map: no mapping for pin A
: couldn't map interrupt
"Ricoh 5C552 Firewire" rev 0x08 at pci2 dev 9 function 1 not configured
vendor "Ricoh", unknown product 0x0822 (class system unknown subclass
0x05, rev 0x17) at pci2 dev 9 function 2 not configured
vendor "Ricoh", unknown product 0x0592 (class system subclass
miscellaneous, rev 0x08) at pci2 dev 9 function 3 not configured
auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: irq 10,
ICH6 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HTS541040G9AT00>
wd0: 16-sector PIO, LBA48, 37758MB, 77328961 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, DW-224E-C, S.8A> SCSI0 5/cdrom
removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
"Intel 82801FB SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/16384
pcic0 controller 0: <Intel 82365SL rev 1> has socket A only
pcmcia0 at pcic0 controller 0 socket 0
pcic0: irq 3, polling enabled
biomask ebf5 netmask ebf5 ttymask fbff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
ubt0 at uhub2 port 1 configuration 1 interface 0
ubt0: vendor 0x04e8 product 0x7021, rev 1.10/5.25, addr 2
ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2
ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=0x83, isoc-out=0x3;
wMaxPacketSize=49; nframes=6, buffer size=294
