Hi, prolly copied from the MISDN-FAQ:
my B410P does not get a L1: The default Resistor Settings on the B410P are OFF, just turn them ON and it should work OK. without proper bus termination you won't get a stable connection. You did this ? To the PPP issue: You already checked the misdn-faq? There are some notes about PPPD. g. Sven Am Montag, den 30.07.2007, 12:11 +0200 schrieb Sylvain Boily: > Hi, > > Le lundi 30 juillet 2007 à 12:02 +0200, Sven Hirschmüller a écrit : > > Hi, > > > > we are using Beronet cards for the nt mode and it work ok. Without a > > sight of your configuration it's hard to say if there is a simple > > configuration error. Maybe you forgot to set the proper options > > in /etc/asterisk/misdn.conf ? > > After some research probably the cable is not ok, but i'm not sure, i > test a new this afternoon. After this test i send you my configuration. > > > > > The module unload crashing was a known issue for quite some time in > > misdn. I thought it was fixed, maybe your not using the newest misdn > > version even if you think so but on the other hand i didn't check this > > behaviour for quite a time now, maybe it's still a issue. > > I have the latest stable 1.1.5 not latest GIT version. I do a test with > latest version and i report an issue to the mISDN mantis if i have the > same problem. > > > > > To your ppp tests. We tried to use capi mode as well but stop testing it > > after meeting numerous problems. We kicked PPP to work in using misdn > > via asterisk and app_pipe. > > I haven't tested chan_capi and app_pipe. Just chan_misdn / app_pipe, > chan_misdn / app_pppd, chan_capi / app_pppd. > > Thanks. > Sylvain > > > > > g. > > Sven > > > > Am Samstag, den 28.07.2007, 10:14 +0200 schrieb Sylvain Boily: > > > Hi, > > > > > > I'm using mISDN 1.1.5 with the lastest channel from beronet, Digium > > > B410P and Asterisk 1.2.22. It working great with TE mode. I have testing > > > the NT mode with same configuration but it seems it doesn't working. I > > > have a strange results. > > > > > > I have change the jumper on one card for NT mode and i have configure > > > my /etc/mISDN.conf with mode="nt". On the asterisk CLI i saw my card is > > > on NT mode for the first Asterisk and TE mode for the second. I'm using > > > a standard RJ45 informatique cable. On my NT card my led is green and on > > > the cli the misdn show stacks say all is good. But on the second the L1 > > > is down and if i make a call i have no communication. > > > Another thing it seems when i'm in NT mode, when i unload module the > > > kernel freeze. It reproductible when i change parameters on > > > the /etc/mISDN.conf when the module is started and i unload it. > > > > > > I use debian ETCH standard with kernel 2.6.18-4-686. > > > > > > Thanks for your help. > > > Sylvain > > > > > > _______________________________________________ > > > Misdn-asterisk mailing list > > > [email protected] > > > http://lists.beronet.com/cgi-bin/mailman/listinfo/misdn-asterisk > > > > > > > _______________________________________________ > > Misdn-asterisk mailing list > > [email protected] > > http://lists.beronet.com/cgi-bin/mailman/listinfo/misdn-asterisk _______________________________________________ Misdn-asterisk mailing list [email protected] http://lists.beronet.com/cgi-bin/mailman/listinfo/misdn-asterisk
