Le lundi 30 juillet 2007 à 13:10 +0200, Sven Hirschmüller a écrit :
> Hi,
> 
> prolly copied from the MISDN-FAQ:
> 
> my B410P does not get a L1:
> The default Resistor Settings on the B410P are OFF, just turn them ON
> and it should work OK.
> 
> without proper bus termination you won't get a stable connection. You
> did this ?

Yes i have change on the card.

> 
> To the PPP issue:
> You already checked the misdn-faq? There are some notes about PPPD.

Yes and i have testing with all informations from mISDN faq and
voip-info.org.

Sylvain

> 
> g.
> Sven
> 
> 
> Am Montag, den 30.07.2007, 12:11 +0200 schrieb Sylvain Boily:
> > Hi,
> > 
> > Le lundi 30 juillet 2007 à 12:02 +0200, Sven Hirschmüller a écrit :
> > > Hi,
> > > 
> > > we are using Beronet cards for the nt mode and it work ok. Without a
> > > sight of your configuration it's hard to say if there is a simple
> > > configuration error. Maybe you forgot to set the proper options
> > > in /etc/asterisk/misdn.conf ?
> > 
> > After some research probably the cable is not ok, but i'm not sure, i
> > test a new this afternoon. After this test i send you my configuration.
> > 
> > > 
> > > The module unload crashing was a known issue for quite some time in
> > > misdn. I thought it was fixed, maybe your not using the newest misdn
> > > version even if you think so but on the other hand i didn't check this
> > > behaviour for quite a time now, maybe it's still a issue.
> > 
> > I have the latest stable 1.1.5 not latest GIT version. I do a test with
> > latest version and i report an issue to the mISDN mantis if i have the
> > same problem.
> > 
> > > 
> > > To your ppp tests. We tried to use capi mode as well but stop testing it
> > > after meeting numerous problems. We kicked PPP to work in using misdn
> > > via asterisk and app_pipe.
> > 
> > I haven't tested chan_capi and app_pipe. Just chan_misdn / app_pipe,
> > chan_misdn / app_pppd, chan_capi / app_pppd.
> > 
> > Thanks.
> > Sylvain
> > 
> > > 
> > > g.
> > > Sven
> > > 
> > > Am Samstag, den 28.07.2007, 10:14 +0200 schrieb Sylvain Boily:
> > > > Hi,
> > > > 
> > > > I'm using mISDN 1.1.5 with the lastest channel from beronet, Digium
> > > > B410P and Asterisk 1.2.22. It working great with TE mode. I have testing
> > > > the NT mode with same configuration but it seems it doesn't working. I
> > > > have a strange results.
> > > > 
> > > > I have change the jumper on one card for NT mode and i have configure
> > > > my /etc/mISDN.conf with mode="nt". On the asterisk CLI i saw my card is
> > > > on NT mode for the first Asterisk and TE mode for the second. I'm using
> > > > a standard RJ45 informatique cable. On my NT card my led is green and on
> > > > the cli the misdn show stacks say all is good. But on the second the L1
> > > > is down and if i make a call i have no communication.
> > > > Another thing it seems when i'm in NT mode, when i unload module the
> > > > kernel freeze. It reproductible when i change parameters on
> > > > the /etc/mISDN.conf when the module is started and i unload it.
> > > > 
> > > > I use debian ETCH standard with kernel 2.6.18-4-686.
> > > > 
> > > > Thanks for your help.
> > > > Sylvain
> > > > 
> > > > _______________________________________________
> > > > Misdn-asterisk mailing list
> > > > [email protected]
> > > > http://lists.beronet.com/cgi-bin/mailman/listinfo/misdn-asterisk
> > > > 
> > > 
> > > _______________________________________________
> > > Misdn-asterisk mailing list
> > > [email protected]
> > > http://lists.beronet.com/cgi-bin/mailman/listinfo/misdn-asterisk
> 
> _______________________________________________
> Misdn-asterisk mailing list
> [email protected]
> http://lists.beronet.com/cgi-bin/mailman/listinfo/misdn-asterisk
-- 
Sylvain BOILY
Proformatique - 67 rue Voltaire - 92800 Puteaux
Tel. : 01 41 38 99 64 - Fax. : 01 41 38 99 70
Email : [EMAIL PROTECTED] - http://proformatique.com/

"Vers un monde plus libre"
------------------------------------
Proformatique est membre de l'ASS2L
http://www.ass2L.org

_______________________________________________
Misdn-asterisk mailing list
[email protected]
http://lists.beronet.com/cgi-bin/mailman/listinfo/misdn-asterisk

Reply via email to